« previous next »
Pages: [1]   Go Down

Author Topic: 6mm AI help  (Read 355 times)

0 Members and 1 Guest are viewing this topic.

Offline handi243

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 1119
6mm AI help
« on: March 24, 2007, 12:43:30 PM »
I'm going to ream my ultra 243 to 6mmai BUT can't find any dies for my lee press any help.
Logged

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: 6mm AI help
« Reply #1 on: March 24, 2007, 12:50:24 PM »
I beleave you can use the lee collet 6mm rem dies on the 6mm AI also for neck sizing. I am not 100% sure on this but there should be someone here who knows for sure.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline flitz

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 206
  • Gender: Male
Re: 6mm AI help
« Reply #2 on: March 24, 2007, 01:17:48 PM »
handi

are you doing it yourself or having a smith do it?was thinking of going
6mm ai myself.

flitz
Logged
TO THE HUNT

Offline flitz

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 206
  • Gender: Male
Re: 6mm AI help
« Reply #3 on: March 24, 2007, 01:33:23 PM »
redding makes them. 40 degree shoulder
2 die set 172-975 61.99
3 die set 103-473 103.99
those are at midway

flitz
Logged
TO THE HUNT

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 6mm AI help
« Reply #4 on: March 24, 2007, 01:39:13 PM »
Midsouth carries them too...

Redding 6mm Improved Dies
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: 6mm AI help
« Reply #5 on: March 24, 2007, 04:08:08 PM »
You need the full length dies...you can't get away with just neck sizing in a break open single shot with this type of cartridge...too much stretch
Logged
"one shot is usually enough"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 6mm AI help
« Reply #6 on: March 24, 2007, 04:23:59 PM »
That's not true, I only neck size for my .280 Improved, but I do have a body die if and when I need it. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »