« previous next »
Pages: [1]   Go Down

Author Topic: Rear Sight change on Win-94  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

Offline target22

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Rear Sight change on Win-94
« on: April 06, 2007, 06:40:25 AM »
I am having trouble removing the rear sight from a Winchester-94 30-30. Ant ideas, I've been adding penetrating oil to it hoping it might make a difference but no luck.
It is an older style rear sight. Is the dovetail tapered, if so which way should it be driven. Towards loading gate side or opposite loading gate side.

Thanks for any help.
Logged

Offline Old Time Hunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
Re: Rear Sight change on Win-94
« Reply #1 on: April 07, 2007, 07:02:16 AM »
Towards the loading gate. Tap it from the left to loosen, tap from the right to tighten.

Lefty...Loosey: Righty...Tighty!
Logged

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: Rear Sight change on Win-94
« Reply #2 on: April 07, 2007, 02:08:34 PM »
Take care to inspect the area of the rear sight above the barrel dovetail for a screw head, as some rear sights are secured from being moved, windage-wise, until the screw is loosened.
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline target22

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: Rear Sight change on Win-94
« Reply #3 on: April 10, 2007, 09:59:56 PM »
Thank-You
Target
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Rear Sight change on Win-94
« Reply #4 on: April 16, 2007, 03:21:53 AM »
Try some PB spray , B'LASTER/B.C.C.I. is the manf.
Logged
If ya can see it ya can hit it !
Pages: [1]   Go Up
« previous next »