Author Topic: 45 ACP?  (Read 724 times)

0 Members and 1 Guest are viewing this topic.

Offline alan in ga

  • Trade Count: (13)
  • A Real Regular
  • ****
  • Posts: 692
45 ACP?
« on: April 03, 2007, 03:15:15 AM »
Anyone lined a barrel for the 45ACP round? I don't know if a factory NEF .452" barrel exists. Guess the new 45LC at .454"[?] would be close enough.
I looked at the bore of my .357 Mag Handi Rifle [NR series] and am very impressed with the quality of the bore. I looked only at the first 1/4" of the muzzle with my microscope [binocular] and it is a FINE job of reaming and rifleing. Fine enough that I'll take it to a buddy's house that has a HawkEye Borescope to check out the rest of the bore. Shoots great,,,what a great cartridge for the Handi rifle.
I have a 45 cal muzzleloader octagon barrel blank that I have thought about fitting to my Ruger 77 .308 bolt face action, and chambering to .45ACP. Should be the "CB Cap" of 45 bores. I don't know if its a .450/.452/.458 bore, tho. Ever since I read about an Argentine Mauser being barrelled to 45 ACP years ago in RIFLE magazine, I've wanted to have one. Guess it'll be a single shot, but that's ok with me.
Alan in GA

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: 45 ACP?
« Reply #1 on: April 03, 2007, 04:44:08 AM »
Alan, I have been in the waiting phase of a .45 ACP Handi for a little while now. It will be created by "stubbing" the barrel and I as you think it will be a great fun round in a HandiRifle. There are others here that want them. Here is a link that may be of interest to you if you want a .45 ACP Handi...I am looking forward to receiving mine with great anticipation....


http://dandtcustomgunworks.myfreeforum.org/BARREL_STUBBING_PROJECT__about15.html

http://dandtcustomgunworks.myfreeforum.org/PICTURES_of_CUSTOM_H_amp_R_s_about16.html

....<><.... ;D
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 45 ACP?
« Reply #2 on: April 03, 2007, 01:40:12 PM »
I found new 16.5 inch 45 ACP barrels for $75.00, they are even chambered.  Wouldn't take more than a day to have it on a Handi.  Larry
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: 45 ACP?
« Reply #3 on: April 03, 2007, 02:35:13 PM »
where?
"one shot is usually enough"

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 45 ACP?
« Reply #4 on: April 03, 2007, 03:57:39 PM »
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline alan in ga

  • Trade Count: (13)
  • A Real Regular
  • ****
  • Posts: 692
Re: 45 ACP?
« Reply #5 on: April 04, 2007, 02:16:51 AM »
Hey thanks,,!
Wonder what the thread dia/tpi is on that Thompson barrel? If the thread shank is small, there is not enough barrel length to cut it off and start over [16.5" barrel].
That finned barrel sure would look neat on a Ruger 77 or even a "Handi" [?]
I live close to Lothar Walther barrel company in Cumming, Georgia. Might see what they have and spend a few more $$.
The new Handi in .45 Long Colt is very close to this idea. I think a varmint weight barrel on a bolt action would make for a fun single shot plinker, tho.
Wheels are spinning.
Alan in GA.