« previous next »
Pages: [1]   Go Down

Author Topic: 500 S&W ????  (Read 693 times)

0 Members and 1 Guest are viewing this topic.

Offline Oldsnow

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
500 S&W ????
« on: April 12, 2007, 03:58:35 PM »
Has any one ever taken a NEF, 500 S&W barrel and made a muzzle loader out of it, by having a breach plug installed in it? This way you could eliminate the primer carrier.   
Logged
Thats all she wrote.

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: 500 S&W ????
« Reply #1 on: April 13, 2007, 03:24:54 AM »
I think there are other breech plugs available for NEF BP barrels that use primed 25 acp brass or 209 primers that don't use the carrier.  No need to go through all that trouble to fix that problem.  Check the NEF Muzzleloader forum.
Logged
"one shot is usually enough"

Offline darat100

  • GBO Supporter
  • Trade Count: (79)
  • A Real Regular
  • *****
  • Posts: 808
Re: 500 S&W ????
« Reply #2 on: April 13, 2007, 04:25:36 AM »
I know the 25acp plugs are available.  Just look on ebay.  They are there constantly.  I am sure you can find them elsewhere as well.  As for the others, I am not sure.  You might ask this over in the huntsman forum.  There are some guys over that way that really know their stuff.
Logged

Offline edgemark

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
Re: 500 S&W ????
« Reply #3 on: April 13, 2007, 06:59:04 AM »
I suspect that he is going smokeless in his ML.

edge.
Logged

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: 500 S&W ????
« Reply #4 on: April 13, 2007, 08:34:20 AM »
If that is the case the breechplug will need to be long enough to insure the seated bullet can't get into the chamber throat area.
Logged
"one shot is usually enough"

Offline BANG_OW

  • GBO Supporter
  • Trade Count: (11)
  • Contributor
  • *****
  • Posts: 266
  • Gender: Male
Re: 500 S&W ????
« Reply #5 on: April 13, 2007, 08:46:08 AM »
Sounds like a lot of work to go through to screw up a good barrel. :P
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W ????
« Reply #6 on: April 13, 2007, 08:49:13 AM »
I'd just buy an SMI barrel and be done with it, sell the .500 barrel to offset cost! ;)

Tim

http://www.smokelessmuzzleloading.com/
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline wgr

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
Re: 500 S&W ????
« Reply #7 on: April 14, 2007, 12:00:04 PM »
yes it can be done. not sure this is the place to talk about it. dont mess up a good barrel just get a 50cal   barrel  thread it for a breach plug   fit the under lug and go . e mail me if you would like to know more. have two done this way

Logged
never to much gun

Offline Oldsnow

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
Re: 500 S&W ????
« Reply #8 on: April 16, 2007, 05:00:01 AM »
Quote from: wgr on April 14, 2007, 12:00:04 PM
yes it can be done. not sure this is the place to talk about it. dont mess up a good barrel just get a 50cal   barrel  thread it for a breach plug   fit the under lug and go . e mail me if you would like to know more. have two done this way



I would like to know more about this. Thanks Oldsnow, send me a E-mail.    habackus@mchsi.com
 
Logged
Thats all she wrote.
Pages: [1]   Go Up
« previous next »