Author Topic: Time for Remington repair service?  (Read 1085 times)

0 Members and 1 Guest are viewing this topic.

Offline snake guy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Time for Remington repair service?
« on: April 26, 2007, 04:26:36 PM »
I have a new Remington 504 in 17M2 that experienced a case rupture after 10 rounds (photos posted over at Rimfire Central). Scared the crap out of me! Remington is sending me a box so I can return the gun to them and they are being very nice about it. However, does anyone with experience with Remington's service department have an idea of how long this is likely to take? I was supposed to take the 504 on a trip with my brother in a couple of weeks, but I am guessing that's probably not going to happen.

Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Time for Remington repair service?
« Reply #1 on: April 26, 2007, 10:10:33 PM »
Your Remington will be gone not less than 3 weeks.

Unless you live close to the NY plant, you probably would have been better off contacting one of Remingtons Gunsmith Service Centers across the Country and work through the Service Center.  That is what they are there for.
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline beemanbeme

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2587
Re: Time for Remington repair service?
« Reply #2 on: April 27, 2007, 03:03:02 AM »
Three weeks??  I doubt that is gonna happen.  Call and ask for a return window but understand they don't know what's wrong with the rifle yet.  Whatever you do, keep a paper trail with peoples names. 
colour me sadder and wiser.

Offline snake guy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: Time for Remington repair service?
« Reply #3 on: April 27, 2007, 07:02:23 AM »
Three weeks??  I doubt that is gonna happen.  Call and ask for a return window but understand they don't know what's wrong with the rifle yet.  Whatever you do, keep a paper trail with peoples names. 
colour me sadder and wiser.

Good advice and I have already started a log on this.

I have a feeling that may find nothing wrong and it may have been the ammo (also Remington's). The other possibilities appear to be headspace or a wrong-length firing pin. The pin would be an easy fix, but I have no idea what Remington would do with the headspace for a discontinued model.

As for why I went with the main factory as opposed to the regional service centers, I figured that a safety issue should be brought to the attention of the top folks. Might have been a mistake, but at least they were really nice about it.


Offline jvs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1539
Re: Time for Remington repair service?
« Reply #4 on: April 29, 2007, 10:38:56 PM »
As for why I went with the main factory as opposed to the regional service centers, I figured that a safety issue should be brought to the attention of the top folks. Might have been a mistake, but at least they were really nice about it.

If you go through a Service Center you would have an advocate  between you and the person at the Factory if you don't like the response.  A factory Rep has avenues of contact at the factory that you will never have.
There is no more safety issues sending it back to an authorized rep than there is to the factory. 

Factory Reps dont just fall off the Turnip Truck and decide they want to be a Remington factory rep, Remington has very strict standards as to whom they choose to represent them.   

When you go directly to the factory, you run the risk of being told :

"Your rifle conforms to Factory Specs and no repair is needed".

And unfortunately, this answer is one that pops up more and more often.

At which point you have no recourse.
 
 If you want to run with the Wolves, you can't Pee with the Puppies.

Offline snake guy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: Time for Remington repair service?
« Reply #5 on: May 01, 2007, 04:42:06 PM »
JVS:

Well, you have me convinced and I appreciate the advice. I just wish I had seen all this earlier, as the 504 went back to the factory yesterday. I'll just have to keep my fingers crossed that the customer service rep I have been dealing with will be as helpful as she has been so far and won't try blow this off.