Author Topic: 30-06 Handi with 125 gr bullets  (Read 865 times)

0 Members and 1 Guest are viewing this topic.

Offline orchemo

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 120
30-06 Handi with 125 gr bullets
« on: May 23, 2007, 07:54:21 PM »
Am thinking that verses using a 25-06 with 120 gr bullets, that one could use 125 gr bullets loaded in 30-06 rounds. Remington also commercially produces the Express rounds.

How does the Handi barrels shoot the 125 gr bullets. Rate of barrel twist ect.

For ranges less than 250 yards any arguable differences?

Thanks
Eric

Offline Coffee_Boy

  • Trade Count: (1)
  • Member
  • *
  • Posts: 39
Re: 30-06 Handi with 125 gr bullets
« Reply #1 on: May 24, 2007, 01:27:16 AM »
Remington now has a web site with ballistic results comparisons.  It shows the BC of the 30 caliber bullet is only .268, compared to .362 for the 25.  A comparison indicates the two bullets will have similar energy at 200 yards.  However, beyond that, the 25 caliber leaves the 30 in the dust.

http://www.remington.com/products/ammunition/ballistics/

Does anyone know where to find sectional densities for commercial loads?

Offline buffermop

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 946
Re: 30-06 Handi with 125 gr bullets
« Reply #2 on: May 24, 2007, 01:30:47 AM »
I presently hand load 100gr. Hornady bullets in my "06". Works for me. :)

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: 30-06 Handi with 125 gr bullets
« Reply #3 on: May 24, 2007, 05:51:31 AM »
Remington now has a web site with ballistic results comparisons.  It shows the BC of the 30 caliber bullet is only .268, compared to .362 for the 25.  A comparison indicates the two bullets will have similar energy at 200 yards.  However, beyond that, the 25 caliber leaves the 30 in the dust.

http://www.remington.com/products/ammunition/ballistics/

Does anyone know where to find sectional densities for commercial loads?

While not specifically for commercial loads..here's a list of a lot of common bullets...http://www.chuckhawks.com/sd.htm

Sierra makes a nice program that has a lot of the latest bullet data available..http://www.sierrabullets.com/index.cfm?section=reloading&page=infinity

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: 30-06 Handi with 125 gr bullets
« Reply #4 on: May 24, 2007, 05:52:53 AM »
Am thinking that verses using a 25-06 with 120 gr bullets, that one could use 125 gr bullets loaded in 30-06 rounds. Remington also commercially produces the Express rounds.

How does the Handi barrels shoot the 125 gr bullets. Rate of barrel twist ect.

For ranges less than 250 yards any arguable differences?

Thanks
Eric

This would depend on what you were hunting...

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 30-06 Handi with 125 gr bullets
« Reply #5 on: May 24, 2007, 06:05:54 AM »
Does anyone know where to find sectional densities for commercial loads?

Midway shows SD for most all of their bullets if you know exactly what bullet is loaded in the commercial ammo. Click the Technical Specifications & Use above the bullet pic to see SD and BC. Some bullet BCs are displayed by velocity, others are static.

Tim

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=651260

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=337808

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=168026

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=467379
"Always do right, this will gratify some and astonish the rest" -  Mark Twain