Author Topic: Recommendations for .38 target ammunition manufacturers?  (Read 1640 times)

0 Members and 1 Guest are viewing this topic.

Offline Ned

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
Recommendations for .38 target ammunition manufacturers?
« on: March 28, 2007, 06:30:49 PM »
Not sure if I should ask this here but the ammo section seems to deal with handloading and I am not at that stage yet.

The Distinguished Revolver program requires the use of .38 Special cartridges using a 158 grain round nose or semi-wadcutter bullet; I'm wondering if any particular manufacturer has earned a reputation as a maker of good quality ammo in that caliber? A rather brief search shows prety significant differences in price - I imagine the old "you get what you pay for" adage applies but are there possibly some lower cost makers of good quality products?

Thank you.

Ned

Offline car hauler

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #1 on: March 29, 2007, 04:15:11 AM »
My copy of the rules, say round nose only.

Offline Ned

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #2 on: March 29, 2007, 10:07:49 AM »
car hauler:

Has there been a change in these rules recently?

I have the NRA rulebook that says "effective 2005" and that does indicate either round nose or SWC are acceptable (rule 3.1.4)

I'm just getting started at this so quite possibly missed a change.

Thank you.

Ned

Offline car hauler

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #3 on: April 04, 2007, 02:48:58 AM »
Ned,
 Just saw your post. I just went and looked at the date of my rulebook 2004. So your 2005 would be the one to go with. Unless there is another one out. In 2 weeks if I  am in town I will be working the Dixie match, and I will check, and report back my findings. For now though I apologize for the wrong info.
  John Roberts

Offline car hauler

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #4 on: April 16, 2007, 06:57:11 AM »
Ned,
 I checked the rules at the match this weekend, as well as talked to the NRA referee. As you stated 158, roundnose, or swc. Also commercial manufactured reloads are legal also.
  John Roberts

Offline Ned

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #5 on: April 16, 2007, 07:22:10 AM »
John:

Thank you for taking the time to check.

Was there a DR segment at the match you attended? Is the Smith & Wesson pretty much the gun of choice for that event?

Thank you again.

Ned

Offline car hauler

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #6 on: April 16, 2007, 11:20:02 AM »
Ned,
 Yes I believe a 278 won it. As I was a line officer, I walked the line, and looked at all revolvers. There were very few K-38's, which suprised me. Most of the guns were full lug, with a lot of pythons.
 John Roberts

Offline nrb

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 134
Re: Recommendations for .38 target ammunition manufacturers?
« Reply #7 on: July 10, 2007, 01:33:00 AM »
Back to your original question. I know of a highly regarded ammo supplier for pistol target. The company is NSK Sales you can find them on the web.

best,       nrb