« previous next »
Pages: [1]   Go Down

Author Topic: Receiver  (Read 268 times)

0 Members and 1 Guest are viewing this topic.

Offline RWK

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 266
Receiver
« on: July 31, 2007, 04:42:40 PM »
I have a receiver No. NR358344, has a large firing pin ? will this work with muzzle loader- shotgun and 22's. Thanks Rich
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Receiver
« Reply #1 on: July 31, 2007, 04:46:31 PM »
I will work for a shotgun and the huntsman barrels, but not for rimfire since it's a centerfire frame. The best way to find out what can be fitted is to call H&R and ask em, (866)776-9292, toll free.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Receiver
« Reply #2 on: July 31, 2007, 04:49:03 PM »
I would say a qualified yes to both.  For a Rimfire you must have the barrel with an offset chamber so the pin will strike the rim of the cartridge.  For the muzzel loader, early ML barrels used a very large flat fireing pin to strike the cap, newer ML barrels use a primer carrier arrangement and use a smaller fireing pin.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.
Pages: [1]   Go Up
« previous next »