www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Cast Bullet Discussion
»
Lee mould for 45/70
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Lee mould for 45/70 (Read 1114 times)
0 Members and 1 Guest are viewing this topic.
mandoman
Trade Count:
(
0
)
Member
Posts: 10
Lee mould for 45/70
«
on:
August 09, 2007, 01:00:00 PM »
For a Black Hills Pedersoli Remington Rolling Block in 45/70. Is not the bullet a .459 ? Lee has several moulds 405 gr. through 450 gr. that I'am interested in.
Only when you get to their 500 gr. mould do you get to the .459. Will the .457 bullet work in the Pedersoli ?
Logged
Graybeard
Administrator
Trade Count:
(
69
)
Senior Member
Posts: 26939
Gender:
Re: Lee mould for 45/70
«
Reply #1 on:
August 10, 2007, 10:55:05 AM »
This IS NOT the Classifieds. It's a DISCUSSION Forum not a buy, sell, trade forum. Take it off line or to the Classfieds. ALL posts not discussion related HAVE BEEN DELETED.
I'd not want to try .457" bullets myself unless very soft or having a hollow base to bump up. You'd need to slug the barrel to be sure but I'd go with either .459" or at the least .458". I'd expect a lot of leading at .457".
Logged
Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125
I am not a lawyer and do not give legal advice.
Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!
ds7418
Trade Count:
(
11
)
Member
Posts: 73
Gender:
Re: Lee mould for 45/70
«
Reply #2 on:
August 10, 2007, 12:03:32 PM »
Sorry about that,, it won't happen again. Thanks for a great forum.
Dewayne
Logged
Freightman
Trade Count:
(
0
)
Avid Poster
Posts: 107
Re: Lee mould for 45/70
«
Reply #3 on:
August 24, 2007, 04:46:25 PM »
I have had good results with the LEE 405 HB mold, also the 450 GC mold didn't have as good luck with the 500g pointed with PB.
Logged
Idaho Ron
Trade Count:
(
0
)
Contributor
Posts: 291
Gender:
Re: Lee mould for 45/70
«
Reply #4 on:
August 24, 2007, 04:55:59 PM »
My Lee 405 Hollow base only throws 385. Anybody know why? How heavy are yours? Ron
Logged
Castaway
Trade Count:
(
0
)
Senior Member
Posts: 1105
Gender:
Re: Lee mould for 45/70
«
Reply #5 on:
August 24, 2007, 11:29:54 PM »
Idaho Ron, what's your alloy?
Logged
Freightman
Trade Count:
(
0
)
Avid Poster
Posts: 107
Re: Lee mould for 45/70
«
Reply #6 on:
August 25, 2007, 05:20:55 AM »
You are right 375g but I use range scrap mostly with 10% pure lead. Still shoots well, I also have good results from a Lyman 300g PB.
Logged
Idaho Ron
Trade Count:
(
0
)
Contributor
Posts: 291
Gender:
Re: Lee mould for 45/70
«
Reply #7 on:
August 25, 2007, 05:41:14 AM »
Castaway, The lead I am using is soft. I don't know the exact ratio but they are REAL soft. The same lead in a 250 gr LEE REAL throws 252 gr. The 475 gr whitworth throws 475 to 476. The 405 lee Hollow base throws up to 386. I just weighed some. Ron
Logged
Castaway
Trade Count:
(
0
)
Senior Member
Posts: 1105
Gender:
Re: Lee mould for 45/70
«
Reply #8 on:
August 25, 2007, 11:27:15 AM »
Idaho Ron, if it's soft, seems to me the mould is slightly undersized, either in diameter or depth or both. If it shoots ok, I wouldn't worry about it. Anything killed by a 405 grain bullet will also die with one 20 grains lighter.
Logged
Idaho Ron
Trade Count:
(
0
)
Contributor
Posts: 291
Gender:
Re: Lee mould for 45/70
«
Reply #9 on:
August 25, 2007, 05:50:59 PM »
To be honest I am not disappointed with it. The soft lead ones go down good but they don't have The taper to them that makes them load good in a muzzleloader. I am thinking about sizing them to .455 or .454 or something like that. My Whitworth mould is supposed to throw .457 but it is .455, They go down good. The Lee 405 measures .457, if they were a little smaller in Dia it would help getting them started. The .455 Whitworth start good even when I use lead from lead shot. Those bullets are much harder and the Whitworth bullets that are poured hard like that are hard to load but MAN they shoot GOOD! I get 1.25" groups at 100 yards. The soft lead is between 1.5" and 2" at 100 yards.
The Lee 405's shoot 2" at 100 yards. I would like to make them harder and size them down a bit. I like this rifle so far for target shooting. Ron
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Cast Bullet Discussion
»
Lee mould for 45/70