« previous next »
Pages: [1]   Go Down

Author Topic: ADL, BDL, CDL ?????  (Read 726 times)

0 Members and 1 Guest are viewing this topic.

Offline JimG

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 419
ADL, BDL, CDL ?????
« on: August 14, 2007, 07:11:42 AM »
Not real familiar with Rem rifles. What is the difference between the ADL, BDL, CDL rifles? Looking at possibly buying a .22-250 ADL synthetic.
Logged

Offline tjkanavel

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 119
Re: ADL, BDL, CDL ?????
« Reply #1 on: August 14, 2007, 07:50:15 AM »
It was just their way of naming their models.The ADL was the "cheaper" model,it has actually been replaced with the SPS (Special Purpose Synthetic), it had a plain stock with no floor plate.The BDL was a little nicer with nicer wood on the wood stocks and had a floor plate.The CDL is very nice,very nice wood usually with an ebony tip on the stock,deep rich bluing and just a nicer looking rifle.I believe (somebody correct me if I am wrong) but the actions and barrels are all the same,just different bluing on them.Nice thing is,that if you buy the ADl you can swap and switch stocks and all between the nicer models.Hope this helps.

Tim
Logged

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: ADL, BDL, CDL ?????
« Reply #2 on: August 14, 2007, 10:51:08 AM »
If you're going for a light weight rifle, but don't want to downsize to a Remington Model Seven, the ADL is the lightest, since it uses the wood of the belly of the stock as the floorplate in its "blind" magazine.  The downside is that unloading is done via cranking them out through the top.

I don't recall what models detachable magazines are available in.
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
Re: ADL, BDL, CDL ?????
« Reply #3 on: August 14, 2007, 11:49:13 AM »
The DM is the drop magazine model, and as long as you dont interfere with the triger guards and the followers the barreled actions are interchangable between the ADL/BDL/CDL  HTH  JIM
Logged

Offline The Sodbuster

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 387
Re: ADL, BDL, CDL ?????
« Reply #4 on: August 14, 2007, 12:50:03 PM »
In addition, the recent BDLs I recall seeing all had a high gloss finish to the stock and white line spacers.  I think most came with iron sights as well.  The recent CDLs all had a less shiny finish and no white line spacers.  Personally, I liked the look of the CDLs.
Logged

Offline billy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 407
Re: ADL, BDL, CDL ?????
« Reply #5 on: August 14, 2007, 02:37:27 PM »
I got a ADL that had sys. stock i switched it over to wood ,shoots great ,not much on sys. stocks like wood or lam. stocks.
Logged
I enjoy collecting guns, swaping and staying up on all the newest models. I deer, quail, squirrel and rabbit hunt.

Offline Ponydog

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 234
Re: ADL, BDL, CDL ?????
« Reply #6 on: August 15, 2007, 06:33:02 AM »
If you look hard, you can still find a few ADL's in walnut.........I have had mine for years, but I could not ask for a better shooter...I love mine chambered in a 270........look around , I saw a laminated 270 in a Wal Mart in Sikeston Missouri
Logged
“when a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, it is their right, it is their duty, to throw off such Government.”
Pages: [1]   Go Up
« previous next »