Author Topic: Anybody reload for their Taurus  (Read 926 times)

0 Members and 1 Guest are viewing this topic.

Offline superjay01

  • Trade Count: (12)
  • Contributor
  • ***
  • Posts: 262
  • Gender: Male
Anybody reload for their Taurus
« on: June 08, 2007, 06:59:03 AM »
The reason I am asking is I want a 41mag. The only company that I have found that makes a DA 41 mag is Taurus. I am wondering how hot you can load the Taurus say vs a ruger or smith.
thanks
Chance favors the prepared mind

Offline James B

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 944
Re: Anybody reload for their Taurus
« Reply #1 on: June 12, 2007, 05:47:56 AM »
You should be able to load it to S&W levels. Only A Ruger or Dan Wesson would be my choice for real Hot loads.
shot placement is everything.

Offline Ak.Hiker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 389
Re: Anybody reload for their Taurus
« Reply #2 on: June 16, 2007, 06:07:16 PM »
I think S&W is offering several double action 41 magnums. I have heard they will be bringing back the 4 inch 57 in their retro line.

Offline coop2564

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 525
Re: Anybody reload for their Taurus
« Reply #3 on: June 17, 2007, 04:49:30 AM »
I have a 41mag RB 6.5"  I love it! Mine had a great trigger out of the box.  I've taken 3 hogs and about a dozen rabbits.  I loaded the 210 jsp rem to as high as 21.5 grs with H110 there were no high pressure signs but it was a handful I had my best accuracy with 20grs.
Browning Illusion Bow
Omega Thumbhole .50_NEF Huntsman .50
Knight KP1 .243_Custom Rem 700 .308_Browning Safari Bar .300 WSM, Ruger No.1 30-06
Taurus .41 rem mag Raging Bull_S&W M&P 40C_Browning BuckMark .22_Savage 93R .17HMR

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: Anybody reload for their Taurus
« Reply #4 on: August 16, 2007, 02:28:18 PM »
i have a ruger blachawk 41 mag and after two years i think i have finally settled on a load. in a ragin bull 41 mag you would certainly have just as capable a revolver,and they are a good lookin piece.try 20.1 grains 296 a winchester large pistol prime and a 210 gr xtp. should shoot well for you. good luck with your choice.dan
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.

Offline corbanzo

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: Anybody reload for their Taurus
« Reply #5 on: August 21, 2007, 10:13:22 AM »
I was loading for my 6.5" raging bull in .454 casull, and did some test loads using 200 grain cast bullets. 

Starting at 31 grains of H110, I was getting good velocities around 1500+fps.  I moved up from there, but once getting up to 33 grains, the muzzle flash was huge, lots of flame out the barrel.  These loads would definitely need a longer barrel to be fully effective.  I made my way up to 35 grains at which I was getting up to 1800+ fps at 5 feet from the chrono.  I would expect higher velocities with jacketed bullets, I just had a lot of cast lead lying around, so decided to make some test loads.  The 33 grainers delivered the most consistant and seemingly efficient load for this barrel length, though that is where the high muzzle flash started.

Even when loading to the top end, my RB has handled all the loads I have put through it just fine. 
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline corbanzo

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: Anybody reload for their Taurus
« Reply #6 on: August 22, 2007, 11:05:54 PM »
Those were 250 grain cast bullets, not 200's, typo
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."