Author Topic: S&W 180 gn np in S&W 27  (Read 711 times)

0 Members and 1 Guest are viewing this topic.

Offline fatercat

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 690
S&W 180 gn np in S&W 27
« on: August 23, 2007, 02:30:36 AM »
hodgdon list 15 grs. of lil'gun for 1422 fps with a 180 gn.nosler partition. is this too heavy for a smith & wesson 27?

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
Re: S&W 180 gn np in S&W 27
« Reply #1 on: August 23, 2007, 06:11:38 AM »
The S&W 27 is as strong as any .357 Magnum out there I'd reckon. IF Hodgdon says it's a safe load for use in .357 Magnum guns then it should be safe in the S&W M27. Now I've not looked it up and do not know that they list it but if they do then for sure the M27 is a super strong gun and can take it if other guns so chambered can.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline fatercat

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 690
Re: S&W 180 gn np in S&W 27
« Reply #2 on: August 23, 2007, 01:16:09 PM »
your always there, ain't you old man?  i just got a new one, 8 3/8"barrel, and it is going to become my new deer rifle. maybe a hog or two.  got a sholder holster so won't be anything to carry, hell, i can't walk far anymore.

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: S&W 180 gn np in S&W 27
« Reply #3 on: August 23, 2007, 04:00:55 PM »
i've shot that load using an 180grxtp,and maybe the bullet design could come into play,but otherwise the load did fine.
given the aforementioned results,and no problems ejecting the cases,i am going to give some 170gr cast a try with
about 13.5 to 14 grs of lilgun. good luck,dan
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: S&W 180 gn np in S&W 27
« Reply #4 on: August 23, 2007, 04:02:46 PM »
sorry for omitting in the previous post that load of 15grs of lil gun and the 180grxtp was sot out of a 6" gp100.
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.

Offline canon6

  • GBO Supporter
  • Trade Count: (119)
  • Senior Member
  • *****
  • Posts: 1508
  • Gender: Male
Re: S&W 180 gn np in S&W 27
« Reply #5 on: August 23, 2007, 06:08:02 PM »
I have used that very load in both my Rossi 92(16inch) and in my S&W model 28, a less fancy version of the 27,called a Highway Patrolman   hth   Doug
a armed man is his own master

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: S&W 180 gn np in S&W 27
« Reply #6 on: August 24, 2007, 11:20:58 AM »
27s are some of the best and strongest ever made. I still own two of them.



I use a healthy load of 2400 under Hormaday 180 XTPs and get 1200 fps.
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!