Author Topic: 209x50 loads for pistol  (Read 418 times)

0 Members and 1 Guest are viewing this topic.

Offline Two Bears

  • Trade Count: (10)
  • A Real Regular
  • ****
  • Posts: 537
209x50 loads for pistol
« on: October 24, 2007, 01:17:10 PM »
I posted this in the t/c pistol area and thought that I might see more reply on the topic here

I have just purchased a 15" 209x50 pistol barrel and want to know what loads you have tried in them and what produced the best accuracy.

Thanks
HAVING A LIBERAL ALONG IS LIKE LOSING 2 GOOD MEN

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: 209x50 loads for pistol
« Reply #1 on: October 24, 2007, 04:08:20 PM »
Two Bears, I had one for about two years, I was shooting 2 of the 50 gr. triple 7 pellets with a 295 gr. power belt bullet. I took one deeer at a little over 60 yards with it. Worked like a charm and my accuracy was very good. 
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline akbearhunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 47
Re: 209x50 loads for pistol
« Reply #2 on: November 04, 2007, 12:38:37 AM »
Hello two Bears...

I bought one last spring and used it to take a black bear in Central Alaska. I stalked the bear from a tidal salt marsh...and shot the bear at 35 yards. My load was two 50 grain pellets behind a 295 grain Power Belt bullet. The bullet entered its neck and exited the ribs behind the offside shoulder blowing a 3" diameter hole. *I'm not sure the bullet held together like it should have...but the bullet wound was so large the bear was spraying blood on both sides of the creek bottom it ran through. The Power Belt bullet appears to be soft lead...plated with copper.

I love my pistol!
Hunt with the wind in your face, honesty in all your dealings with others, and forget not to praise our Creator for yet another day...