« previous next »
Pages: [1]   Go Down

Author Topic: .243 handi load?  (Read 4077 times)

0 Members and 1 Guest are viewing this topic.

Offline sanso1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
  • Gender: Male
    • Sansone Gun Services
.243 handi load?
« on: September 12, 2007, 05:57:36 AM »
I've switched deerguns from a savage .243 to a new .243 standard handi. reason being I was loading my boltie one at a time anyway so I could see my future as a singl-shot rifle hunter. the loads that did well for my savage were H380 (39grs) + 80gr pill. I'm thinking of switching powder to slower H4350.  anybody have a pet load their 243 Handi? // FYI: I almost didn't buy the .243 because of all the posts stating 243 handi's won't group. I had problems swallowing that since my cheap savage boltie did so well with 243..  so far I haven't been shooting enough to test the handi groups.
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: .243 handi load?
« Reply #1 on: September 12, 2007, 08:17:38 AM »


I had real good luck with Reloader 22..Remington cases and Rem 9-1/2 primers...



Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline sanso1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
  • Gender: Male
    • Sansone Gun Services
Re: .243 handi load?
« Reply #2 on: September 12, 2007, 09:50:37 AM »
thanks, reloader #22 is very close (burn rate) to H4350 / I'm in the sticks and the nearest dealer(another county) stocking powder has mostly Hodgdon. .. I believe #22 is short-cut extruded logs
Logged

Offline sanso1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
  • Gender: Male
    • Sansone Gun Services
Re: .243 handi load?
« Reply #3 on: September 12, 2007, 09:53:21 AM »
nope.. I was wrong / reloader 19 is close to the same burn rate as H4350
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .243 handi load?
« Reply #4 on: September 12, 2007, 10:05:55 AM »
I've had pretty good luck with H4895 and the Speer 100gr BTSP in my Superlight, it's a book load right from Hodgdon, except I'm loading it .010" off the lands which puts it longer than theirs.

Tim

http://data.hodgdon.com/cartridge_load.asp

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline fanner50

  • GBO Supporter
  • Trade Count: (29)
  • Contributor
  • *****
  • Posts: 395
Re: .243 handi load?
« Reply #5 on: September 12, 2007, 11:04:13 AM »
When I get home this evening I'll look up my load for the .243. I use IMR4350 and the 95 gr CT bullet for excellent results. 1/2" MOA I'll post it here for ya. - MJ
Logged

Offline fanner50

  • GBO Supporter
  • Trade Count: (29)
  • Contributor
  • *****
  • Posts: 395
Re: .243 handi load?
« Reply #6 on: September 12, 2007, 04:01:12 PM »
I load 42 gr of IMR 4350 behind a 95 gr Combined Technology WW Brass CCI LR Primers. Actual Crono from my rifle 2888 fps. Has been responsible for the death of numerous antelope white tails and muleys. One antelope at 427 yds on the range finder. Good luck and good shootin. - F50
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .243 handi load?
« Reply #7 on: September 12, 2007, 04:15:29 PM »
The Nosler 5th puts that load ½gr over their max of 41.5gr, just a heads up for those that want to work with that combination, start load is 37.5gr, Rem 9½, Win brass, COL is 2.710". ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline fanner50

  • GBO Supporter
  • Trade Count: (29)
  • Contributor
  • *****
  • Posts: 395
Re: .243 handi load?
« Reply #8 on: September 12, 2007, 04:37:43 PM »
You're right Quick. I think it goes without saying any recommended load should be worked up to carefully. Thanks for the follow-up. 
Ragards
Logged

Offline sanso1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
  • Gender: Male
    • Sansone Gun Services
Re: .243 handi load?
« Reply #9 on: September 14, 2007, 08:55:39 AM »
fanner- thanks for the load. sorry this reply took a while. I expect to purchase H4350 because I'm expecting it will do well in this handi. Sierra claims the 1:10 twist limits the bullet weight to 90gr.. I've got 80's and 100's // think I'll purchase a box of 90's to load-up with the H4350... will post reults
Logged

Offline Dave Allen

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 193
  • Gender: Male
Re: .243 handi load?
« Reply #10 on: September 15, 2007, 10:41:15 AM »
sanso1..imr 4350 & 90 grain speer spitzer's work's reasonably well for me...my load is 38.1 grain's...my c.o.l. i s 2.715 which is slightly over book...according to my o.a.l. gauge i'm about 0.020 from the land's...
Logged

Offline oneshotonekill

  • Trade Count: (15)
  • A Real Regular
  • ****
  • Posts: 503
Re: .243 handi load?
« Reply #11 on: September 15, 2007, 02:01:58 PM »
A load that shot real good for me in the 243 was 45 gr H4350 and a 75gr Vmax in federal brass CCi 200 primer at a length of 2.625"  That isn't really a deer load but it was a great shooter.  I tried 80 grain rem corelokt's over H4350 and they didn't do too well.  I had a little bit of AA3100 left so I loaded a few 80 grainers over the 3100 to use it up and they shot much better than the H4350 loads.  I just loaded up some more with a new lot of 3100 but I haven't been to the range yet.
Logged

Offline Dave Allen

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 193
  • Gender: Male
Re: .243 handi load?
« Reply #12 on: September 16, 2007, 05:47:52 AM »
oneshot..i found your comment's interesting...i didn't have any luck with..h4350..yet imr 4350 worked..reloading is strange sometime's..
Logged

Offline oneshotonekill

  • Trade Count: (15)
  • A Real Regular
  • ****
  • Posts: 503
Re: .243 handi load?
« Reply #13 on: September 16, 2007, 09:22:35 AM »
I had a few loads with IMR4350 that did alright as well but I was trying to keep it to H4350 since that is what he said he was buying.  Its very interesting how much different 2 of the same guns can be when it comes to ammo preferences.  I think that is why I like to reload so much (always looking for that magic recipe).
Logged

Offline GrampaMike

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 904
  • Gender: Male
Re: .243 handi load?
« Reply #14 on: September 16, 2007, 09:45:00 AM »
243 Ultra Varmint 24” barrel

Bullet: Sierra 80gr SBT Blitz

One of my favorites because it seems to like almost everything I feed it.

Six loads under 1 MOA average

Brass trimmed to 2.035

In order of most accurate.

36.4 VihtaVuori N135 at 2.616 C.O.L. chrony at 2982

36.3 Accurate 2495 at 2.620 C.O.L. chrony at 3057

38.5 Accurate 4064 at 2.620 C.O.L. chrony at 3066

38.1 Accurate 2520 at 2.622 C.O.L. chrony at 3035

39.1 VihtaVuori N150 at 2.628 C.O.L. chrony at 2986

42.3 Accurate 4350 at 2.621 C.O.L. chrony at 3090
Logged
Grampa Mike
U.S. Army Retired

"Say what you mean, mean what you say"
Father of 2 GREAT sons, and 9 grandchildren.

Offline sanso1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
  • Gender: Male
    • Sansone Gun Services
Re: .243 handi load?
« Reply #15 on: September 17, 2007, 04:47:22 AM »
thanks for all the load info  :o
Logged
Pages: [1]   Go Up
« previous next »