« previous next »
Pages: [1]   Go Down

Author Topic: purchasing steel or brass in michigan  (Read 570 times)

0 Members and 1 Guest are viewing this topic.

Offline leesecw

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
  • Gender: Male
purchasing steel or brass in michigan
« on: November 02, 2007, 12:42:41 PM »
Anyone have a place for buying steel or brass to machine a full sized coehorn here in Michigan? Any websites?
Logged
If Guns cause crime, then mine are defective...Ted Nugent

Offline petersen_arms

  • Trade Count: (1)
  • Member
  • *
  • Posts: 8
Re: purchasing steel or brass in michigan
« Reply #1 on: November 02, 2007, 01:01:26 PM »
Here's a web address for a place in holland. www.genzinksurplussteel.com
I haven't had a chance to get over there but heard there good to work with. Copper @ brass sales is in grand rapids, but they are quite expensive. I can get a few more places for you around Grand Rapids if you are interested? Where are you located?
Logged

Offline leesecw

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
  • Gender: Male
Re: purchasing steel or brass in michigan
« Reply #2 on: November 02, 2007, 01:05:27 PM »
i'm in Saginaw
Logged
If Guns cause crime, then mine are defective...Ted Nugent

Offline misfire

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: purchasing steel or brass in michigan
« Reply #3 on: November 02, 2007, 01:08:23 PM »
Where are you located? Padnos Iron and Steel sell recycled or drops. Right now they have what looks like 8 or 10 inch, Not sure as I did not have my tape with me, round stock cut off drops about 5 foot long. They are located on Willow Hwy.
Logged

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: purchasing steel or brass in michigan
« Reply #4 on: November 02, 2007, 02:21:12 PM »
Right now they have what looks like 8 or 10 inch, Not sure as I did not have my tape with me, round stock cut off drops about 5 foot long.

Man is that going to be HEAVY, about 830 lbs for 8" and 1300 lbs for 10".  Make sure they cut it to the length you actually need.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline misfire

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: purchasing steel or brass in michigan
« Reply #5 on: November 03, 2007, 03:56:36 AM »
Oh I forgot to mention that it was going to be heavy.  ;D Cost is .20 a pound
Logged

Offline leesecw

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
  • Gender: Male
Re: purchasing steel or brass in michigan
« Reply #6 on: November 03, 2007, 12:38:31 PM »
I need 17 inches long and 8 and 3/4ths of an inch wide. Do they carry a piece that size? Where is this place you mentioned?
Logged
If Guns cause crime, then mine are defective...Ted Nugent

Offline misfire

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: purchasing steel or brass in michigan
« Reply #7 on: November 03, 2007, 02:16:12 PM »
Sorry I forgot to say that this place is in Lansing, MI. Thought I wrote that in the message. Padnos is a steel recycler, but I am sure you can find one of those near you. I search there at least once a week for different pieces as you never know what you will find.
Logged

Offline leesecw

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
  • Gender: Male
Re: purchasing steel or brass in michigan
« Reply #8 on: November 03, 2007, 02:18:36 PM »
The place I got steel from originally rifken steel in saginaw is involved in making a new move to a another location and doesnt deal in steel right now. Since then I havent found another
Logged
If Guns cause crime, then mine are defective...Ted Nugent
Pages: [1]   Go Up
« previous next »