« previous next »
Pages: [1]   Go Down

Author Topic: 2219 Horton vs. Easton bolts  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
2219 Horton vs. Easton bolts
« on: October 06, 2007, 09:47:05 AM »
I have been experimenting with these on my Horton xbow. I have the bow set up for the Horton bolts perfectly but only have two and thought the Eastons would be a good equal match. But in practise with both using 100 target points, the Eastons shoot lower by several inches at 25 yds. Any thoughts on the difference between these bolts? I can't find any Hortons alum. 2219s anywhere near my home so I went to the Eastons. So far in deer hunting I only needed one bolt per season anyway to do the job!

Joe
Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Re: 2219 Horton vs. Easton bolts
« Reply #1 on: October 06, 2007, 06:46:45 PM »
Maybe the Hortons use lighter inserts??? Or maybe they are lighter than the Easton 2219's even though the numbers are the same. Only sure way to tell would be to weigh them both and see if their is a difference.
Logged
Said I never had much use for one, never said I didn't know how to use it.

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #2 on: October 07, 2007, 08:22:49 AM »
yes I am sure it must be something like that or the fletching is slightly shorter on the Eastons. I will weigh them and see, but I will have to find someone who has a scale that can work on those.

Joe
Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #3 on: October 21, 2007, 02:46:53 PM »
If you are using same weight field tips then its either fletching or weight issue! Are they all the same length?
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #4 on: October 22, 2007, 02:59:37 PM »
Yes the fletching is slightly longer on the Horton 2219s but they are the same length and supposed to be the same wgt. for 2219.

Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #5 on: October 22, 2007, 11:33:55 PM »
The shaft should weigh the same if made of the same type n spec's as eastons. With the Hortons having 5" and eastons having 4" vanes eastons should be lighter. Cept the spec's Hortons could be made out of lower grade alum. thats lighter than eastons. Insert weights or nok weights something is different! Maybe the way its fletched? Offset vs. helical can cause arrows to hit different POI.
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #6 on: October 23, 2007, 02:18:52 AM »
I definitely think its the fletching different size that causes the POI change. I am planning to zero the scope on this xbow in on the Eastons, since they are brand new and I have 3 of them. thanks.

Joe
Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #7 on: October 23, 2007, 05:12:35 AM »
Sure wish i could give a better answer to help. I am not knowing on Hortons arrows. I do know eastons as i have used them since 60's.
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #8 on: November 01, 2007, 02:38:32 AM »
UPDATE-

finally got around to sighting it in with the Easton 2219 arrows and its dead on at 25 yds. with target and expandable broadheads. I think the difference was really in the length of the fletching although I never weighed both arrows yet. Guess I won't need to do that.

Joe
Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline smokepolehall

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 230
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #9 on: November 01, 2007, 04:37:57 AM »
I am glad to hear those eastons are doing the trick fer you.
Logged
Keep yer nose into the wind & slip from tree to tree in the shadows, you have come fer pilgrim! Miss Vixen & Miss Phoenix, I am The Vixenmaster!

Offline Jal5

  • GBO Supporter
  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 1252
  • Gender: Male
Re: 2219 Horton vs. Easton bolts
« Reply #10 on: November 07, 2007, 11:46:48 AM »
Now if I could just keep em from hitting those little twigs that get in the way like I did on Saturday...
Logged
S. G. G. = Sons of the Greatest Generation. Too old to run, too proud to hide; we will stand our ground and take as many as we can with us

Offline jh45gun

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4992
Re: 2219 Horton vs. Easton bolts
« Reply #11 on: November 07, 2007, 05:22:54 PM »
Yea that happens
Logged
Said I never had much use for one, never said I didn't know how to use it.
Pages: [1]   Go Up
« previous next »