« previous next »
Pages: [1]   Go Down

Author Topic: IMR 4227  (Read 1011 times)

0 Members and 1 Guest are viewing this topic.

Offline bull

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
IMR 4227
« on: October 17, 2007, 08:41:24 AM »
Question, (and I probably already know the answer): with the demise of H4227, since Hodgdon owns IMR or whatever, can H4227 data be used directly for IMR 4227? 

I was given some load data for a 30Herrett barrel I acquired and the best loads were with H4227. But you can only get IMR 4227 now. I know I could/should start low and work up, but I'm just trying to look for a shortcut.

bull
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: IMR 4227
« Reply #1 on: October 17, 2007, 09:27:27 AM »
Hodgdon shows IMR4227 data on their website. ;)

Tim

http://data.hodgdon.com/cartridge_load.asp
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18266
Re: IMR 4227
« Reply #2 on: October 17, 2007, 11:16:28 AM »
imr is packaging the h4227 as there powder now so its really the irm thats gone.
Logged
blue lives matter

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: IMR 4227
« Reply #3 on: October 17, 2007, 11:38:51 AM »
Lloyd is right, after reading that 4227 was to be discontinued in Handloader magazine I sent an email early last year to Dave Campbell at Hodgdon about the status of H4227/IMR4227, this is his reply...

Tim

The product name H 4227 has been discontinued. Future lots of IMR 4227 will be manufactured in Australia by ADI. While the color of the future lots will be the same as current lots of IMR 4227 future lots of IMR 4227 will be Extreme.

Dave Campbell
Customer Satisfaction
Hodgdon Powder Company/ IMR Powder Company



I had also asked about H4198 as it's one of my favorites...

Tim,

After getting a couple more E-mails like yours I went and double checked my facts.

What I wrote you about H 4227 and IMR 4227 is correct. Also, H 4198 will continue in it's current form in the Hodgdon line as far as I can determine.

However, in the next year or so ADI will begin manufacture of IMR 4198.

I hope this clears things up.


Dave Campbell
Customer Satisfaction
Hodgdon Powder Company/ IMR Powder Company

Fed-Mar 2006 Handloader article that prompted the inquiries...
Quote
All that said, with the recent purchase of the IMR Powder Company by the Hodgdon Powder Company came the realization that IMR-4227 out sells H-4227 by a very wide margin. Consequently I've been informed that sometime in 2006, as supplies run out, there will be no more H-4227. IMR-4227 will continue on serving handloaders as it has since 1935. Supplies of both will no doubt be on dealer shelves for some time to come, but be forewarned.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: IMR 4227
« Reply #4 on: October 17, 2007, 02:48:37 PM »
bull

I think you are playing with fire here , ANY TIME you change powders you should always work up loads , even from lot to lot of the SAME powder .

Here you are wanting to go from one powder to another .  :o 

Even if H4227 is being packaged as IMR4227 now , there are no garintees that the pound of powder that you get marked IMR4227 is truly H4227 , as there will still be bunches of both floating around for some time to come .

You will be better off to start low and work up , leave the shortcuts for the drive home .  ;)

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: IMR 4227
« Reply #5 on: October 17, 2007, 05:01:20 PM »
There are some Hodgdon powders that are exactly the same as some Winchester offerings but I've never heard that IMR 4227 is the same as H4227.  I don't think they are equivalent.  I also heard that H4227 would be discontinued and IMR 4227 continued but not that H4227 would be packaged as IMR 4227.
Logged

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: IMR 4227
« Reply #6 on: October 18, 2007, 12:02:03 AM »
Quote from: stimpylu32 on October 17, 2007, 02:48:37 PM


I think you are playing with fire here , ANY TIME you change powders you should always work up loads , even from lot to lot of the SAME powder .

Here you are wanting to go from one powder to another .  :o 


You will be better off to start low and work up , leave the shortcuts for the drive home .  ;)

stimpy

Amen!
 Stimpy has nailed this one, please follow his advice.

GOOD SHOOTING!
Slufoot
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18266
Re: IMR 4227
« Reply #7 on: October 18, 2007, 01:06:52 AM »
one thing you have going for you here is the new imr is packaged in the plastic jug and the old is in the steel can and while im the first to agree that even though there very simular powders ive gotten differnt results with them but if a guy is so stupid as to be running them that close to the ragged edge of pressure limits without testing new loads on a chronograph he about deserves what he gets.
Logged
blue lives matter

Offline bull

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
Re: IMR 4227
« Reply #8 on: October 18, 2007, 03:17:47 AM »
Thats what I thought. I'll just start low and work back up. At least I have a possible idea of optimum with this barrel. Gives me more reasons to spend more time at the benches, both reloading and shooting.

Thanks

bull
Logged

Offline OLDHandgunner

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 696
  • Gender: Male
Re: IMR 4227
« Reply #9 on: October 18, 2007, 06:33:59 AM »
I've always used IMR 4227 in my Ruger 44 carbines & 22 Hornet and used H4227 in my 30 Herrett contender. So back to the drawing board & shooting bench after all my old powder is used up.
This is why I tell people to buy a new reloading manual every year or so just to keep up with all the changes that are happening in the shooting world.
Logged
Pages: [1]   Go Up
« previous next »