« previous next »
Pages: [1]   Go Down

Author Topic: eldorado&seiville  (Read 961 times)

0 Members and 3 Guests are viewing this topic.

Offline 445supermag

  • Trade Count: (0)
  • Member
  • *
  • Posts: 58
eldorado&seiville
« on: March 18, 2003, 11:24:51 PM »
Does any one have one? I have a eldorado in 44mag. Looks like the fa.
Logged

Offline Seville

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: eldorado&seiville
« Reply #1 on: October 18, 2007, 01:31:18 PM »
I have many. My favorite is my 41 mag 4 5/8" stainless with my initials as the serial number.

Logged

Offline 22popnsplat

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 218
Re: eldorado&seiville
« Reply #2 on: October 20, 2007, 06:57:56 PM »
All I have managed to acquire is a stainless grip frame that i believe is for the Seville . My intent was to install it on one of my blackhawks but I have so many projects in the works that I never seem to get to it .
Logged

Offline Seville

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: eldorado&seiville
« Reply #3 on: October 22, 2007, 08:04:16 AM »
The grip will not fit the Ruger. I do not think you will be able to fit it properly.

Logged

Offline TRWalker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: eldorado&seiville
« Reply #4 on: October 24, 2007, 09:39:26 AM »
I have two.  One is a Seville in .357 Maximum with a 7.5 inch barrel.  The second is a El Dorado in .45 Colt made in Chimney Rock, NC. Both are excellent condition and are possibly my  two most favorite handguns. One has a set of initials as a serial number followed by a number. I sure would love to find out who the initials JTB belong to. I probably need to "letter" both guns.  It would be nice to know a bit more of their history. I have read everything I could find on the internet, the big puzzle that remains is that  serial number.
Logged

Offline TRWalker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: eldorado&seiville
« Reply #5 on: October 24, 2007, 09:42:05 AM »
Just wanted to correct an error I made. The barrel on my Seville .357 Maximum is 10 inches, not 7.5
Logged

Offline Seville

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: eldorado&seiville
« Reply #6 on: October 24, 2007, 11:19:03 AM »
TRWalker,

The 357 Maxi should be a 10 1/2" barrel? The serial number is probably someone's intials. I have a 41 Seville Stainless Serial Number JDH-1. My name.

What is the 357 serial number?


John D Himmelmann
www.singleactions.com
Logged

Offline TRWalker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: eldorado&seiville
« Reply #7 on: October 24, 2007, 03:29:18 PM »
I am sure it is a 10.5 inch, I haven't taken it out in a while, I knew it was around 10 inches. The El Dorado  serial is JTB-1. Do you have any idea  who  that might be?
The seville .357 Max is 357M2087. It was made in Tuscon
 
Walker
Logged

Offline Seville

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Re: eldorado&seiville
« Reply #8 on: October 25, 2007, 08:03:52 AM »
Sorry no clue on JTB-1. But the Maxi 357m-2087 is the 86th gun made in the maxi line. A very early model.

John
www.singleactions.com
Logged
Pages: [1]   Go Up
« previous next »