Author Topic: 357 and 44 leverevolution  (Read 571 times)

0 Members and 1 Guest are viewing this topic.

Offline benderboy77

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
357 and 44 leverevolution
« on: November 14, 2007, 06:21:54 PM »
Those thinking of getting a 357 or 44 barrel, hornady will offer these bullets next year along with the 22wmr. Good news for non-reloaders. ;)

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 and 44 leverevolution
« Reply #1 on: November 14, 2007, 06:34:49 PM »
Here's a peek, the 22mag ammo is Vmax, not Leverevolution. ;)

Tim

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline benderboy77

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: 357 and 44 leverevolution
« Reply #2 on: November 14, 2007, 06:56:00 PM »
"The new 357 Magnum LEVERevolution® ammunition features a 140 grain FTX (Flex Tip®
eXpanding) bullet at 1440 fps from a 7.5" revolver and 1850 fps when fired from an 18" carbine.
44 Magnum performance is equally impressive with its 225 gr FTX bullet leaving the muzzle of
a 7.5" revolver at 1410 fps and reaches 1870 fps when fired from a 18" carbine."

How do this compare ballasticly  to premium ammo already out? ???

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 and 44 leverevolution
« Reply #3 on: November 14, 2007, 07:11:38 PM »
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline GatCat

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 666
Re: 357 and 44 leverevolution
« Reply #4 on: November 14, 2007, 08:03:29 PM »
I think it's interesting that out of a rifle, both loads at 150 yards equal revolver velocity's at 50 yards. Not to shabby!!!
Mark

Offline handi243

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 1119
Re: 357 and 44 leverevolution
« Reply #5 on: November 14, 2007, 11:11:08 PM »
I just wish they sold the bullets separate some we could reload them.

Offline darat100

  • GBO Supporter
  • Trade Count: (79)
  • A Real Regular
  • *****
  • Posts: 808
Re: 357 and 44 leverevolution
« Reply #6 on: November 15, 2007, 07:24:04 AM »
To shoot them in a handi, why not just buy the 35 cal spire points?  They work fine for me.   You just need to change your seating pin in your dies.  the 357 pin will flatten the point of the bullet.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 and 44 leverevolution
« Reply #7 on: November 15, 2007, 07:31:35 AM »
It sure would be real nice to have some .44 cal pointy bullets, at least the .358" SSP is available to handloaders for the mag/max, although I dunno how well it would work at mag velocities at any range that the spitzer would be of any advantage, it likely wouldn't have good terminal performance characteristics. I'm sure the FT bullets would be designed for the velocities the round is capable of.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain