« previous next »
Pages: [1]   Go Down

Author Topic: repair parts for Lee Pro Auto disk?  (Read 325 times)

0 Members and 1 Guest are viewing this topic.

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
repair parts for Lee Pro Auto disk?
« on: November 05, 2007, 08:27:32 PM »
Does any one know if you can get replacement elastomer rings for the Lee Pro Auto Disk?  I tried finding a contact link on the Lee website.  Maybe I'm blind - if you know of a way to reach them by email I'd appreciate it. 

I've had good luck with this unit for years - with a tiny bit of leakage with AA powders and other fine ones.  But last night I noticed that I was getting more leakage than usual with H110. Also with Lil Gun.

thanks
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
oops
« Reply #1 on: November 05, 2007, 09:03:06 PM »
I went back to the Lee site and dug more.  Went into the FAQ section and sure enough if you go thru there and don't find quite the answer you need, there is a hot link to email them.

sorry for taking up space here.  Should have looked harder.
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: repair parts for Lee Pro Auto disk?
« Reply #2 on: November 06, 2007, 02:28:42 AM »
Lee's web site is not that user friendly! The owner's manuals leave a lot to be desired as well.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline jgalar

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1231
  • Gender: Male
Re: repair parts for Lee Pro Auto disk?
« Reply #3 on: November 06, 2007, 03:54:16 PM »
Look at the products and powder measures. By the price is "serv parts" click on it and there is a list of the parts. Click on the picture button to see a picture of the part.
I think what you want is AD3396 Wiper cost $1

http://www.leeprecision.com/cgi/catalog/parts.cgi?1194403728.2479=90429
Logged

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
Re: repair parts for Lee Pro Auto disk?
« Reply #4 on: November 06, 2007, 11:13:03 PM »
thank you  jglar!  I did get an answer from Lee CS but they were directing me to the whole ProAuto upgrade kit!  I'll look for the part you suggest.
Lee also suggested filing down the riser a little and I'll try that first.

thanks again.  I get so much good info off GB!


Dan
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA
Pages: [1]   Go Up
« previous next »