« previous next »
Pages: [1]   Go Down

Author Topic: Dan Wesson 357 MAX  (Read 1082 times)

0 Members and 1 Guest are viewing this topic.

Offline jwwebb

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Dan Wesson 357 MAX
« on: July 02, 2003, 08:05:27 PM »
Greetings one and all.  I just purchased a SS D/W scoped 357 Max. revolver...with eight inch barrell.
  I do not know the model...other than it being called 'Supermax'..and I would like info about this revolver..and possible sites to find a ten inch barrell.  I have a D/W I bought from the USAF days (1973) and have enjoyed it..but I am now looking to hunting deer with this one.  I had a 'custom made' '94' Winchester modified to shoot 357 max..and hence..my interest in this cartriged handgun.  Any help...much appreciated!    Jim
Logged

Offline RollTide

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 457
Dan Wesson 357 MAX
« Reply #1 on: July 03, 2003, 04:39:21 AM »
jwwebb,
I get most of my barrels and stuff either from
gunbroker.com
auctionarms.com
ebay.com
There is a DW distibutor named:
Mike Rowles <dw7360@netscape.net>
He claims to offer DW barrels at 10% off what the factory sells them for.  I am in the process of buying a 445 Supermag barrel shroud from him, so I can let you know how it goes if you are interested.  Of course you can always buy from the factory at:
http://www.danwessonfirearms.com/


I am very interested in your Winchester mdification.  What had to be done to the rifle to allow it to shoot the 357 Supermag?  I have been VERY INTERESTED in getting a Winchester '94 modified to shoot the 445 Supermag which is the same length case as the 357 Supermag.  I was hoping I could just get a Winchester 94 in 44Mag and lengthen the chamber and modify the catridge lifter, but I am not sure that is all there is to it.  If you could tell me the process you went through or sources for gunsmiths or parts I would really appreciate it.

Thanks,
Roll Tide

Logged

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Dan Wesson 357 MAX
« Reply #2 on: July 03, 2003, 03:54:32 PM »
I have a DW 740V8S also.  (Stainless 357 super mag with 8" barrel).  I have a feeling it will get a little more lop-sided (top-heavy, thougher to hold, etc) putting 2 more inches out front.  It is heavy enough and plenty accurate enough to hunt deer, elk, etc the way it is.

Just my $.02.

Steve   :D
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline supermag 445

  • Trade Count: (0)
  • Member
  • *
  • Posts: 80
Dan Wesson 357 MAX
« Reply #3 on: July 30, 2003, 01:05:17 AM »
I am with rolltide I would also like to hear how you got the supermag in a win 94 big bore.  That would just be the ultimate companion to my Dan Wesson 445 supermag.

Brian
Logged
Dan Wesson Rules!!
Pages: [1]   Go Up
« previous next »