« previous next »
Pages: [1]   Go Down

Author Topic: North American Arms smooth bore?  (Read 811 times)

0 Members and 1 Guest are viewing this topic.

Offline His lordship.

  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 1018
North American Arms smooth bore?
« on: January 03, 2008, 02:15:53 PM »
I recently bought a new North American Arms mini-revolver with the second cylinder, this way I can fire the .22 magnum and the .22 LR.  This gun is a smooth bore, it has no rifling.  It shot ok for its type at the range, did better with the magnum in the accuracy department.

They make a target model with adjustable sights, do all of their revolvers have smooth bores?

I have a Casuls Freedom Arms model from the early 80's that is a mini-revolver and it has a rifled bore.

Thanks
Logged

Offline moxgrove

  • GBO Supporter
  • Trade Count: (3)
  • Contributor
  • *****
  • Posts: 469
  • Gender: Male
Re: North American Arms smooth bore?
« Reply #1 on: January 03, 2008, 04:43:48 PM »
I thought they were all rifled.
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: North American Arms smooth bore?
« Reply #2 on: January 04, 2008, 04:33:32 AM »
All I have examined had rifiled bores. Was this a new gun? If it was used, it might be leaded beyond belief! I guess it's possible it could have made it from the factory without rifling.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: North American Arms smooth bore?
« Reply #3 on: January 04, 2008, 04:36:51 AM »
I'd clean the bore and take a really good look at it and if you're sure it has not rifling I'd return it because I'm sure they should be rifled. It is not even legal to produce a smoothbore pistol unless it is a muzzleloader.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: North American Arms smooth bore?
« Reply #4 on: January 04, 2008, 03:25:07 PM »
Does it say "Companion" on the side of it? These are a black powder cap and ball model.
I'm thinking you might have that one, as it would probably be smoothbore.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline His lordship.

  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 1018
Re: North American Arms smooth bore?
« Reply #5 on: January 04, 2008, 04:59:58 PM »
It is not the black powder gun as I put 65 rounds of cartridge ammo in it when it was tested at the range.  The black powder cap and ball version was tempting as I have been shooting the full sized types for many years and was wondering what a .22 would be like with caps and powder.

On closer examination it looks like there might be rifling, but it sure is shallow.  My other .22 rimfire guns are more pronounced.
Logged

Offline goldhound56

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 240
Re: North American Arms smooth bore?
« Reply #6 on: January 05, 2008, 06:18:29 PM »
 I have a combo 22mag &22 lr you must look real good to see thr rifling in it .
Logged
Pages: [1]   Go Up
« previous next »