Author Topic: rest for .460 while hunting and sitting  (Read 1066 times)

0 Members and 1 Guest are viewing this topic.

Offline vettman1

  • Trade Count: (0)
  • Posts: 4
rest for .460 while hunting and sitting
« on: November 20, 2007, 05:38:50 PM »
I'm looking for some advice on a rest when hunting with my .460. I'm good out to at least 100 yards shooting from a bench and rest, but I really don't have the ability to drag that all down to my ground blind. What should I use? A monopod? A bipod? Something else? Any advice would be great. Thanks!

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: rest for .460 while hunting and sitting
« Reply #1 on: November 21, 2007, 01:50:17 AM »
I use a bi-pod. I rest the chin of the revolver on the Y of the bi-pod.  I use the Stony Point ones that can be adjusted from sitting to standing. When I am walking thought the woods I extend them and they are used as walking sticks as well as a shooting rest.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline obxmike

  • Trade Count: (0)
  • Member
  • *
  • Posts: 55
Re: rest for .460 while hunting and sitting
« Reply #2 on: November 21, 2007, 04:32:41 AM »
I use one of the "pole cat" mono-pods. They're pretty solid, and you can really adjust them just right for your needs. Never tried those shock-corded sticks, but either would serve as a good rest. I think the cost on mine was @ $25-$30 at Cabelas.  Money well spent if you do a lot of still hunting on the ground, and makes a good hiking stick/snake poker as well.

Offline vettman1

  • Trade Count: (0)
  • Posts: 4
Re: rest for .460 while hunting and sitting
« Reply #3 on: November 21, 2007, 02:50:10 PM »
So which one is better? I would think that I could be a bit more steady with a bi-pod, but I like the idea of a mono-pod. BTW where is the "chin" of the revolver? Is it right in front of the trigger guard?

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: rest for .460 while hunting and sitting
« Reply #4 on: November 21, 2007, 04:34:48 PM »
Yes right in front of the trigger guard.

My bi-pod can be used as a walking stick also, the two legs come together, I never really liked the mono-pod, not as steady, but better than nothing.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Ken ONeill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
Re: rest for .460 while hunting and sitting
« Reply #5 on: November 22, 2007, 01:09:48 AM »
I also prefer the Stony Point bipod for heavy revolvers.

Offline vettman1

  • Trade Count: (0)
  • Posts: 4
Re: rest for .460 while hunting and sitting
« Reply #6 on: November 23, 2007, 06:13:49 PM »
Well I ordered the Stoney Point Polecat bi-pod measuring 25"-62". I'll be using it nest weekend to hopefully harvest three deer. I'm pretty pumped!

Offline odie-wan

  • Trade Count: (3)
  • Member
  • *
  • Posts: 53
Re: rest for .460 while hunting and sitting
« Reply #7 on: December 03, 2007, 04:27:44 PM »
I must have some hill-billy in me.  After shopping for shooting sticks, I walked back into the woods and cut a couple straight 1"-2" saplings and lashed them together with duck decoy line.  They work great and if I lay them down and forget them, so what?  Just cut a notch and start the lashings with a good clove hitch.  For what it's worth....

Sean

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: rest for .460 while hunting and sitting
« Reply #8 on: December 04, 2007, 12:02:49 AM »
Quote
After shopping for shooting sticks, I walked back into the woods and cut a couple straight 1"-2" saplings and lashed them together with duck decoy line.

We must be related; I made mine from straight willow branches and put them together with parachute cord through holes I drilled in them.

I much prefer bipods over monopods or tripods by the way.  The monopod doesn't provide adequate lateral or forward/backward stability.  As for the tripod, you are always going to have a little barrel movement.  With a tripod, barrel movement has to be from side to side unlike a bipod where the barrel movement will be more backwards and forwards; the latter will have less of a negative effect on accuracy in my opinion.

Offline Chenango

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
  • Gender: Male
Re: rest for .460 while hunting and sitting
« Reply #9 on: December 06, 2007, 07:20:44 AM »
I guess I'm not the only one who when I'm out in the woods looks for a couple of downed branches to lash together
with strips of raw hide(old boot laces) that I keep attached to my bandoleer holster to create a bipod shooting stick. I
keep it in the bed of my pickup and use it throughout gun season and also the late smokepole season. I prefer these
homemade ones to my stoney point steady stix.  ;D

Offline irold

  • Trade Count: (22)
  • A Real Regular
  • ****
  • Posts: 750
  • Gender: Male
  • "Live today , for tomorrow may never come"
Re: rest for .460 while hunting and sitting
« Reply #10 on: December 09, 2007, 02:15:59 AM »
Certainly don't mean to question anyones methods , to each his own , .....I've found a straight stick ( mono pod ? ) works best for me. With most store bought rests they allow you to rest on top or in the "v" or some variation of that. Seems like Mr. or Mrs. deer always manages to show up in a dip, ravine or hillside or whathave you, making the height of the sticks unusable .  By using just a straight stick you can adjust the height simply by sliding the left hand up or down the stick, then resting the weapon on my left wrist. (for right hand shooters )  Obviously I shoot a contender.....a revolver my burn ya unless you rest it from the grips.  Most deer I've encountered won't give ya enough time to set up a bi or tripod.  Course my method is not nearly as wobble free as afore mentioned devices, but a lot better than off hand. Now maybe if ya hunt from a blind with everything setup........only mho             Sorry, after rereading the originally post, you did say about hunting from a ground blind....gonna leave this post anyway, it may help those of us that still-hunt.

Offline Heavy C

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1088
  • Gender: Male
Re: rest for .460 while hunting and sitting
« Reply #11 on: December 09, 2007, 08:27:25 AM »
Here in Texas we use ground and elevated blinds and they all have walls made from solid material (i.e. plywood).  So I found a small sand bag rest made by Caldwell.  The thing weighs a little more than a pound and packs nicely.  It has the "v" notch to rest your gun, but also has weighted flaps sewn on either side to allow it to straddle the wall of the blind.  It is solid and allows for a variety of shooting angles.

When I walk I utilize a mono pod.  It works, but in hindsight a bi-pd would have probably been better.  Fortunately I spend most of my time in a blind.