Author Topic: Remington 770  (Read 848 times)

0 Members and 1 Guest are viewing this topic.

Offline AP5030

  • Trade Count: (0)
  • Posts: 4
  • Gender: Male
  • Being a guardian is fun!
Remington 770
« on: December 22, 2007, 05:22:39 PM »
On a recent hunt, I used a .300 Winchester Magnum to shoot a fairly small (about 100 pound) doe. I quickly discovered that it was WAY too much gun for the small deer in this area. So, I made a trip to Academy in San Antonio, and decided on something in .243 (I've heard nothing but good things about this round). I settled on a Remington 770 stainless model for $379.00 with a $30.00 mail in rebate. The rifle was a package deal, coming with a Bushnell 3-9x40 scope. After adding some scope caps and a sling, I was on my way.

I immediately went to the range after purchasing it, and bore sighted it and fired a few more rounds to get the zero at the optimal point of impact in this area (about 1 inch high at 100 yards). I was using Federal Power-Shok 100 grain soft points. After about 10 rounds, I was able to obtain this group:



That's not too bad if you ask me! I was kind of skeptical at first about whether or not this rifle would be good or not, and I quickly had my questions answered.

IMHO, this rifle is great for the money, and has performed very well in range testing thus far. I will update my post after I go hunting!

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: Review of Remington 770 in .243
« Reply #1 on: December 22, 2007, 06:13:51 PM »
That is a great group!!!!!!!!!!!! looks like you have a shooter. Dale
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline jpbar

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
  • Gender: Male
  • coyote #3 duke
Re: Remington 770
« Reply #2 on: December 26, 2007, 04:44:35 AM »
wow surprised you like the 770 a lot of people dont, including me.
i have one in 270. win and it sucks!! the action is very flimsy and not worth talking about.
 the clip sticks
the bullets get chop topped when reloading
the only thing i liked about it was the accuracy it was very good shooting borsighted out of the box
 congrats!!

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: Remington 770
« Reply #3 on: December 28, 2007, 04:00:30 AM »
I have heard a lot of bad things about the action on the 710/770 rem.
Kind of getting tired of it. People are just afraid of something new.
It has three locking lugs that lock directly into the barrel.
The bolt on this gun is just a handle and dose very little once closed.
All the ones I have heard about have been plenty accurate.

Check out the site.
http://www.remington.com/products/firearms/3-D/model_710/default.asp#mts3
.Then click on Barrel.

They may not be best for someone that shoots a 1000 rounds a year but they have there place.

Offline AP5030

  • Trade Count: (0)
  • Posts: 4
  • Gender: Male
  • Being a guardian is fun!
Re: Remington 770
« Reply #4 on: December 29, 2007, 08:58:57 PM »
I agree

I know some don't like the 710 or 770...I own a 710 in .300 WinMag and a 770 in .243....both guns are very accurate. Neither one will win a beauty contest, but I don't think that the paper target or the game animal on the receiving end will care what my rifles look like.

Sure, I also know that the bolts on both are kind of weird, but once again, it does (and has) done the job.

I know I can buy better looking (and MAYBE better performing guns), but for the money I spent, I think I did A-OK!

Jack

Offline Brithunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2538
Re: Remington 770
« Reply #5 on: December 29, 2007, 11:16:47 PM »
Quote
The bolt on this gun is just a handle and dose very little once closed.

   Hmmm so the bolt is not needed to contain the pressure of firing?

     I cannot understand how anyone can honestly defend this blatent piece of marketing?

     Yes they are mainly fairly accurate and some are very accurate. However there is no way I want a throw away rifle, in fact due to cost cutting in a lot of modern rifles I don't want anyhting to do with them. I prefer quality and traditional methods of manufacturing which means Drop Forged parts and no plastic.

Offline sniperVLS

  • Remington & Sig Sauer addict!
  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 893
  • Gender: Male
Re: Remington 770
« Reply #6 on: December 31, 2007, 02:29:12 AM »
Will the 710/770 debates/bashing ever end? I reckon not since some dislike even the 700. Before I speak my mind, allow me to congratulate FireBreathingM44 on his shooting. I bet your shoulder isn't as happy with you though  ;D I fired 15 rounds at one sitting and that was enough for me. I'm spoiled by my tame but much heavier varmint models decked out with heavy scopes/rings/bases and such. I got similiar groupings as you using my cousins, we used 3 different types of ammo and ALL exhibited excellent perfomance out of that barrel. That's something I cannot say for my much pricier 700's.

I don't speak for FireBreathingM44 but the *Majority* of buyers who get these models fire 10 rounds at the range and take them into the woods once a year to hunt, end of story. They are accurate and reliable enough to fill the freezer with meat. Would I buy one? Nope.

But who am I to tell someone that for around 300.0, for a rifle that comes with the scope mounted mind you, that it's a total waste of $$ and belittle them in the process by telling them their decision was bad? I won't do it IF it means it gets them into the woods for the 1st time and gives them an experience they've never had before. Also, a lot of these buyers(again, not speaking about the original poster) don't do research and just want a rifle. 2 of the 3 people I know personally bought them on impulse due to their price and convenience (mounted scope).

And Yes, there's the argument "but they could have gotten something as good as if not better for less". I could say that to everyone here and to myself, many many times over. I could go out and get a different make or Rem model that might perform close to or as good as better than Senderos or a VS, a VSF or a VLS or a Police and so on, but I have absolutely No interest in doing so.

I know 3 people who got 710's the year they launched. My cousin still has his .270, the other 2 have since sold theirs and upgraded to variants of the 700. But guess what, they still take a liking to the cheap 710 because it got them into the woods and onto the range(not in that order ofcourse). These were people that knew I had remingtons, had shot mine but couldnt afford the same models. 1 of them asked what he should get, I suggested an used 700 or the like but he went to Walmart and got the 710 without me knowing he had made a decision. The other got the 710 out of boredom and gave it no thought. As for my cousin, we were at Walmart picking up my VLS and he saw the 710 and was shocked at it's price considering it came with the scope rings and base, ready to go. He thought he'd keep it a few months and unload it but he still has it, go figure.

It does what it's intended, it may not look as nice as others and getting better for less is possible, but unless the people who live for putting down these rifles offer to buy a better model for those interested in one, they should check targets and meat freezers and realize that for $300.00, it's not so bad now is it? My Badger rings and bases cost more than that for poops sake. To me, a few hundred $$ for a rifle that is ready out of the box is a steal, regardless of brand(assuming the it fires when the trigger is pulled).

*My cousin has upwards of 600 rounds thru his 710 .270win. The 20 or so rounds I have fired thru it made me scratch my head, it's very very very accurate. You'd think they'd skimp on the barrel, they did Not. My shoulder didn't thank me though, hahaha.

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: Remington 770
« Reply #7 on: December 31, 2007, 04:50:28 AM »
Quote
The bolt on this gun is just a handle and dose very little once closed.

   Hmmm so the bolt is not needed to contain the pressure of firing?

     I cannot understand how anyone can honestly defend this blatent piece of marketing?

     Yes they are mainly fairly accurate and some are very accurate. However there is no way I want a throw away rifle, in fact due to cost cutting in a lot of modern rifles I don't want anyhting to do with them. I prefer quality and traditional methods of manufacturing which means Drop Forged parts and no plastic.

The front part of the bolt that has the 3 locking lugs on it contains the pressure.
I was trying to point out that once it is locked into the barrel the other parts have no stress.

On a more traditional two lug with a barrel threaded into the action everything must be stronger and more precise.

Offline nomosendero

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: Remington 770
« Reply #8 on: December 31, 2007, 05:30:10 AM »
Sniper VLS, you made some good points. And FB M44, good shooting & I am glad it performs for you. Sniper, I have been critical of these guns & I must admit I don't care for them at all. But what I will say is there is more than 1 way to skin a Cat. I certainly understand working with a small budget, but I would rather go with a used M700. If you are a careful buyer, you can get your money back if you need to or if the weapon does not perform to YOUR expectations. I have stated my case on this matter already &
I will just show the link &save the typing:        http://www.gboreloaded.com/forums/index.php/topic,123958.0.html

I am looking at the best group for this rifle so far, which is .1875"(3 shot) & like Sniper said, t is hard to beat that with one of my Sendero's, but if you buy a NEW 710/770 that does not shoot & all models have those, then expect to lose a little if you can sell it.

But if any of you decide to buy a 770, I hope that it gives you the performance you desire.
You will not make peace with the Bluecoats, you are free to go.