« previous next »
Pages: [1]   Go Down

Author Topic: sight setting  (Read 402 times)

0 Members and 1 Guest are viewing this topic.

Offline Peddler Parsons

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
sight setting
« on: July 06, 2003, 12:04:42 PM »
I have a Pedersoli 1874  if the rear sight is set at 0 at 1/2" for 200yds.  with a sight distance of 34" thin what might  it be for 300yd and 400yds  at the moment I am using 405 gr bullets.
  Peddler
Logged
Peddler Parsons
SASS # 31281  R.O. II
SBSS # 259
Shooter of the Holy Black

Offline Kodiak

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
sight setting
« Reply #1 on: July 08, 2003, 06:21:01 AM »
P.P.,

Like Marsh said, it's kinda hard to say without a posted velocity. Best bet anyway is to set up your targets at these known distances and get a sight-setting for your bullet/powder load. I have found some sights don't need a lot of adjustment ( depends on the caliber/bullet/powder-load) between these known yardages. Lots of variables is right.
Best of luck,

Kodiak
Logged
"The monkey let the hogs out" AK & US
Pages: [1]   Go Up
« previous next »