« previous next »
Pages: [1]   Go Down

Author Topic: ANY GOOD RELOAD FOR 6.8 REM??  (Read 613 times)

0 Members and 1 Guest are viewing this topic.

Offline hhi7410

  • Trade Count: (22)
  • Member
  • *
  • Posts: 95
  • Gender: Male
ANY GOOD RELOAD FOR 6.8 REM??
« on: January 08, 2008, 04:24:33 AM »
NEED GOOD LOAD FOR MY DAUGHTERS CONTENDER RIFLE
IF YOU HAVE ANY GOOD LOAD  PM WITH INFO WILL BE HELP ME
 8)
Logged
NRA life time member

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: ANY GOOD RELOAD FOR 6.8 REM??
« Reply #1 on: January 08, 2008, 01:04:13 PM »
Look at the Hodgedon and and Accurate powder websites. They both list loadings for the 6.8 SPC. I have loaded the starting charges of h335 and 2230 in my 6.8 and have not gone past these beginning loads. Mild recoil and report with good accuracy are my results.

Cheese
Logged
Nothing in the world is more dangerous than sincere ignorance.

Offline Gary paugh

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 135
Re: ANY GOOD RELOAD FOR 6.8 REM??
« Reply #2 on: January 08, 2008, 01:07:39 PM »
I use H322 and get good results from both rifle and pistol  if your going to hunt deer sierra 110gr pro hunter bullet is a good choice.

Gary
Logged

Offline encore3006

  • Trade Count: (10)
  • Contributor
  • ***
  • Posts: 270
Re: ANY GOOD RELOAD FOR 6.8 REM??
« Reply #3 on: January 08, 2008, 05:26:02 PM »
I have the Encore rifle barrel...110 Sierra Spitzer Pro-Hunter, 24.0 gr. H4198, 2.360" COL (.020" to 0.030" from lands), very accurate; took two white tails with one shot each.

If you have time, try the 130 Hornady or 135 Sierra. I just tried starting loads on the 135, 21.0 gr. H4198 at 2.450" COL with amazing accuracy. Will work on it some more to see what I can get.

Little to no recoil...I love it!

Good luck...
Logged

Offline JW/OK

  • GBO Supporter
  • Trade Count: (31)
  • Avid Poster
  • *****
  • Posts: 185
  • Gender: Male
Re: ANY GOOD RELOAD FOR 6.8 REM??
« Reply #4 on: January 13, 2008, 05:18:28 PM »
I have heard that you should avoid bullets heavier than 115 grains in the Thompson Center Contender chambered for the 6.8 Rem SPC. Does anyone know if this is the case?
I have a 23" barrel for the Contender and have shot 5/8 to 1" groups shot so far with one whitetail doe harvested with Barnes Triple X bullets. I will be reloading once I shoot all the factory rounds on hand.
Logged

Offline encore3006

  • Trade Count: (10)
  • Contributor
  • ***
  • Posts: 270
Re: ANY GOOD RELOAD FOR 6.8 REM??
« Reply #5 on: January 14, 2008, 04:14:53 AM »
Hornady has reload info for their 130 grain bullets...
Logged
Pages: [1]   Go Up
« previous next »