Author Topic: Anybody have a new 700 CDL LTD 260?  (Read 909 times)

0 Members and 1 Guest are viewing this topic.

Offline rich56

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Anybody have a new 700 CDL LTD 260?
« on: April 19, 2008, 09:34:44 AM »
IF so how about a range report. I have one on order and missed the first shipment, wondering if its worth the wait.

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: Anybody have a new 700 CDL LTD 260?
« Reply #1 on: April 19, 2008, 11:45:17 AM »
That rifle is on my wish list. It sure is pretty. I think I read some where though that it will not shoot the heavier bullets well because of to slow of twist. I could be wrong but I think it was this rifle. Good luck with it and let us know how it shoots. Dale
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline rich56

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Re: Anybody have a new 700 CDL LTD 260?
« Reply #2 on: April 20, 2008, 04:57:31 PM »
The first time I read  the ad in the Remington catalog it quoted a 1/10 twist. That's been amended to 1/9. I don't plan to shoot bullets over 129 grains since some 120 gn 6.5mm target bullets have a ballistic coefficient over .500. I'll let you know when the rifle comes in.

Offline rich56

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
Re: Anybody have a new 700 CDL LTD 260?
« Reply #3 on: June 07, 2008, 01:37:08 PM »
My rifle should be to me soon. Anybody have theirs yet? They are also showing up on Gunbroker now.

Offline mudstud

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
Re: Anybody have a new 700 CDL LTD 260?
« Reply #4 on: June 14, 2008, 01:50:23 PM »
My local dealer has one.  A very nice rifle, IMHO.

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Re: Anybody have a new 700 CDL LTD 260?
« Reply #5 on: June 21, 2008, 05:16:13 PM »
I want one bad.

I handled one at Gator Gun and Knive in Sulphur, La, the dude had not even had it out of the box, he took it out for me to look at and it is HAWT.  I have a 700 MTN LSS and it was very hard walking out w/o that gun.  He wanted $899.
Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline 277284

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
Re: Anybody have a new 700 CDL LTD 260?
« Reply #6 on: June 22, 2008, 08:09:32 AM »
I wish Remington would just chamber the 260 Rem in their SPS or SPS Stainless

Offline DalesCarpentry

  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 6111
  • Gender: Male
  • I would rather be shooting!!
Re: Anybody have a new 700 CDL LTD 260?
« Reply #7 on: June 22, 2008, 12:41:56 PM »
I wish Remington would just chamber the 260 Rem in their SPS or SPS Stainless
I have been saying that for over a year now. My next rifle will be a 7MM-08 but if they were to chamber a SPS Varmint in the 260 that would be hands down the rifle I would buy. Dale
The quality of a mans life is in direct proportion to his commitment to excellence.

A bad day at the range is better than a good day at work!!

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Re: Anybody have a new 700 CDL LTD 260?
« Reply #8 on: June 22, 2008, 01:54:28 PM »
Remington if you are reading this:

.260
stainless fluted 24" or 26" 
AND laminated


I promise I'll buy it.

 ;D
Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline rich5674

  • Trade Count: (0)
  • Member
  • *
  • Posts: 56
Re: Anybody have a new 700 CDL LTD 260? Just received it!
« Reply #9 on: June 25, 2008, 11:59:53 AM »
Quality, fit and finish of the rifle looks excellent . The gun was advertised as "magnum contour barrel " and 7 5/8 lb. Barrel is sporter contour and 6lb 15 oz!. Nice and light for a 24" barreled sporter but I was looking more for a hunter class silhouette  and a beanfield rifle. Will try to get it out to the range next week. Don't hold your breath waiting for Remington to bring out another 260. This great  caliber seems to be only saved from extinction by target shooters and a few 260 fans. Everyone else missed the boat due to "Magnum-itus"