Author Topic: handgonne pea shooter (Read 2112 times)

plumberroy · « **on:** January 20, 2008, 03:01:10 PM »

I have read about handgonnes on several occasions and love anything that throws lead. Well our factory all ways has a plumber and electrician on sight even when no one else works. last night was one of those nights. So after doing my checks I have a couple hours to kill add a full machine shop all to myself I took a grade 5.3/4 bolt and started tinkering I ended up turning the head down boring the bore 5/16th" x3 1/2" deep drilled a 9/16th"x1 1/4" socket for a tiller and drilled a touch hole and a dimple for a flash pan the gonne is 5 1/4 long I plan on using #2 buckshot but since Icouldn't find any today ,ilooked my junk over for projectiles.found some ball bearing the right size figured with light loads they would work ended up with 15 grains of fffg cotton patch and used an incense stick for a match It was o cold to try to actually hit something but had some fun and made some noise
Roy
the knife is 110 buck for size referece

Terry C. · « **Reply #1 on:** January 20, 2008, 03:28:28 PM »

That's super-cool!

We've had micro-mortars and firecracker cannon, but I think this is the first micro-gonne.

lance · « **Reply #2 on:** January 20, 2008, 03:34:27 PM »

That is COOL!!! i carry the same knife, now i got to have a micro-gonne.

Terry C. · « **Reply #3 on:** January 20, 2008, 04:31:54 PM »

Quote from: lance on January 20, 2008, 03:34:27 PM

i carry the same knife

Me too. I carry either the Buck or a Schrade 'Sharpfinger' depending on whether I want a folder or a fixed-blade knife.

I need to get a photo of my micro-mortar with the Buck for scale.

And yeah, I need a micro-gonne to go with my .50 cal.

plumberroy · « **Reply #4 on:** January 20, 2008, 04:44:15 PM »

bore ended up at .307 I was limited to the bits I had in my tools I reckon thats what you get when you leave a gun nut plumber alone with a lathe

Roy

plumberroy · « **Reply #5 on:** January 21, 2008, 07:20:01 PM »

I have a big handgonne I made with the help of a tool maker where I use to work never got a round to testfiring it so I let a friend take it to play about 3 years ago He never did any thing with but let it rust

so I reclaimed it am cleaning it up I have to get some fuse to test fire it It has a bore of .810 I have some bearings that are.800 but need a sorce for a lead ball .780-.790 I will give a range report when i test it
Roy

Terry C. · « **Reply #6 on:** January 22, 2008, 01:10:53 AM »

You can buy fuse through the mail. I use CannonFuse.com

(I'm assuming you are in the U.S.A.)

They ship fast but fuse can be sent via surface mail only, so expect to wait about a week for shipping.

There are some board sponsors that make ball molds. You can find them in the stickies at the top of the page.

I bought the 1.125" mold that I use for my ¼-scale Napoleon from J-T Moulds in the U.K., but that was a few years ago and I'm not sure if he is still making molds.

(Those handles are for a six-cavity bullet mold.)

If you can figure out which weight you need, cannonball sinkers can be often be used as projectiles.

If you do find a size that works, sinker molds are cheaper than dedicated ball molds. But you will want to make a ball gauge and check each one for roundness. Inexpensive sinker molds can't reproduce the quality of a good ball mold.

My handgonne is only a .50, but there are other members here that have gonnes up to golfball caliber.

I need a bigger gonne (and a smaller one).

Cat Whisperer · « **Reply #7 on:** January 22, 2008, 01:26:44 AM »

PbRoy -

WELCOME to the forum! You've added a new dimension to our experiences with hand gonne's !

Terry C. · « **Reply #8 on:** January 22, 2008, 01:53:47 PM »

Here is my Buck 110, along with my .69 micro-mortar (machined by Kap Pullen):

Now I've GOTTA make a micro-gonne to go with it!

lance · « **Reply #9 on:** January 22, 2008, 03:09:59 PM »

looks like i better ante up and get in on this. here's my .58cal micro-mortar, Buck 110, and Schrade. Now i need that micro-gonne!

Terry C. · « **Reply #10 on:** January 22, 2008, 03:25:10 PM »

Dagnabbit! Now I'm gonna haf'ta edit my photo to include my Schrade!

Nah, I'll just wait until the micro-gonne is done...

BTW: Does everyone have a Buck 110 and a Schrade Sharpfinger?

Ex 49'er · « **Reply #11 on:** January 22, 2008, 03:43:43 PM »

I don't have any microgonnes or micro mortars or buck or shrade knives. I carry a Swiss Army Knife and and a Super Leatherman tool. I'll leave the bucks, shrades, and micro stuff to you gize.

lance · « **Reply #12 on:** January 22, 2008, 03:53:38 PM »

Quote from: Ex 49'er on January 22, 2008, 03:43:43 PM

Swiss Army Knife and a Super Leatherman tool.

Got them too, I'm a big fan of the Super Leatherman.

jeeper1 · « **Reply #13 on:** January 22, 2008, 06:15:16 PM »

Quote

Does everyone have a Buck 110

I have 6 or so Buck knives, two of which are the 110's. Also a bunch of other knives and bayonets.

plumberroy · « **Reply #14 on:** January 22, 2008, 07:34:47 PM »

I really didn't mean to start something

I was just showing off my toy I have not posted on this board but I'm a regular on some of the other board s here at gbo Yes I have a sharpfinger too plus a swiss army knife

after cleaning it up the bigger gonne will take a steel ball bearing I have that measures .810 so and .800 lead ball with patch should work and some one on the reference list sell that size next one I make will take a standard size ball
Roy
I did a proof load firing today 240 grains of fffg w/3 steel ball bearing gun survived with no stress signs [took measurements at several places before and after ] how ever the tiller did not survive the test it was a handle of unknowns origins and mistery wood It now has a hickory shovel handle as a tiller I need to dill the touch hole bigger to accept fuse easier and make a dimple for a flash pan

Cat Whisperer · « **Reply #15 on:** January 23, 2008, 04:25:58 PM »

YUP, PbRoy, you started something.

It's OK too.

THE standard has been a powder can, usually but not always GOEX.

But you've introduced an alternate standard that is instantly recognizable and understood for a comparison for size.

GOOD JOB!

Victor3 · « **Reply #16 on:** January 24, 2008, 03:17:13 AM »

Quote from: plumberroy on January 22, 2008, 07:34:47 PM

I really didn't mean to start something I was just showing off my toy I have not posted on this board but I'm a regular on some of the other board s here at gbo Yes I have a sharpfinger too plus a swiss army knife after cleaning it up the bigger gonne will take a steel ball bearing I have that measures .810 so and .800 lead ball with patch should work and some one on the reference list sell that size next one I make will take a standard size ball
Roy
I did a proof load firing today 240 grains of fffg w/3 steel ball bearing gun survived with no stress signs [took measurements at several places before and after ] how ever the tiller did not survive the test it was a handle of unknowns origins and mistery wood It now has a hickory shovel handle as a tiller I need to dill the touch hole bigger to accept fuse easier and make a dimple for a flash pan

240 grains FFFG and 3 x .810" steel balls? That's a hefty load. I'm not surprised that the stick broke (I'd say that's a "stress sign" right there). What material is it made from and what is the wall thickness at the chamber?

plumberroy · « **Reply #17 on:** January 24, 2008, 04:00:02 AM »

the gonne has a 1/2x5/8 powder chamber and is 1.5 dia in the breech area tapering to 1.25 at muzzle I measured it at three points before and after it did not expand it at all the stock I had on it that broke was a mop handle that I was suspect of to start with I plan on firing it w about 40-50 grain of powder regularly I don't remember the number of the steel type but itis one of the better grades of steel we had in the shop
I have a peice of steel 1.5x10 drilled 8.24 deep x.580 ?
Roy

mazo kid · « **Reply #18 on:** February 03, 2008, 09:43:12 AM »

Yes, Jeff Tanner of the UK is still making his inexpensive brass molds. Workmanship is great, but no sprue cutter. (Do you really need one ?) Emery

Terry C. · « **Reply #19 on:** February 03, 2008, 10:06:57 AM »

Quote from: mazo kid on February 03, 2008, 09:43:12 AM

.. no sprue cutter. (Do you really need one ?)

When casting with wheelweight alloy, the sprues usually break off on their own.