« previous next »
Pages: [1]   Go Down

Author Topic: 336 in 44 mag  (Read 694 times)

0 Members and 1 Guest are viewing this topic.

Offline Scotsman1886

  • Trade Count: (2)
  • Member
  • *
  • Posts: 86
336 in 44 mag
« on: January 17, 2008, 03:50:42 PM »
I just got my first Marlin lever. It's a 336 in 44 mag. Guys at the shop said they had never seen on in 44 mag. I checked in the FAQ files above and it was made in 1964.
Anyone have experence with these?
I haven't shot it yet. Next Thursday most likely.
Its in nice shape though.
Logged

Offline Dixie Dude

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 4129
  • Gender: Male
Re: 336 in 44 mag
« Reply #1 on: January 17, 2008, 04:41:24 PM »
I saw a used one at a gun show and didn't buy it.  Wish I had now.  It is much slicker operating than the 1894 model. 
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
Re: 336 in 44 mag
« Reply #2 on: January 17, 2008, 06:07:10 PM »
Yup got one here it was given to me by a friend back in '91 I believe it was just before we were to head to Texas for an exotics hunt. My wife says it's hers. She used it to take both her rams on that hunt and has taken it hunting several times since. I much prefer it to the 1894 myself.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Dino

  • Trade Count: (1)
  • Member
  • *
  • Posts: 61
Re: 336 in 44 mag
« Reply #3 on: January 18, 2008, 06:45:17 AM »
Also have one. Was made in the sixty's in very limited numbers. Cool gun, mine really likes the new Leverevolution Ammo.

Dino
Logged

Offline cptmclark

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Re: 336 in 44 mag
« Reply #4 on: February 04, 2008, 09:05:16 AM »
I've long wanted a 336 in a long pistol caliber, and been told consistently it can't be done, at least reliably.  Now I have a single shot in 445 SuperMag and would be a very happy man to learn I could get a custom 336 in that caliber.  454 would work also, but is shorter and higher pressure.  The 445 is just a stretched 44 mag.  If the 44 works OK, it seems to me the extra 1/10 inch in length (about 2" loa) might be even better.  My ideal rifle would be with nice wood, good fit and finish, and oct barreled, so a new bbl would be needed but I might not be that picky if I found I could do it at all.  Wonder if the 44 could just be reamed 1/10 and carrier adjusted to feel reliably.  I don't mean to be just re-asking the same question, but this thread has given me hope.  Many thanks.
Logged

Offline Old Grizz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 387
  • Gender: Male
Re: 336 in 44 mag
« Reply #5 on: February 05, 2008, 01:05:37 AM »
Killed my first blackbear with a 336 in.44 mag. Had some problems with it ejecting shells from it, but it was a shooter. Wish I still had it today.
Logged
Marlin 1895G Rules
45-70
Member Team Hornady
Life Member NRA
Member NAHC

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4852
Re: 336 in 44 mag
« Reply #6 on: February 05, 2008, 06:41:38 AM »
I have a Dan Wesson,in .445sm. And did some checking around, and was told the Winchester 94 would be the gun to use, if you wanted to set up a lever gun in that caliber. As the action is already made for a longer cartridge, and it would be easier to shorten, than lenghen the action, if necessary. And I did some comparisons, the rim thickness and diameter are so close between the 30/30 and the .44/.445 that it doesn't look like the bolt or extractor would need much work. But then, I'm not a gunsmith.  gypsyman
Logged
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman

Offline cptmclark

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Re: 336 in 44 mag
« Reply #7 on: February 05, 2008, 07:05:41 AM »
Didn't Winchester make an "Angle eject" or  some similar name rifle that allowed for scope mounting?  I had ruled out the 94 because my old eyes need a scope for hunting.  I saw the 94 would accept the 454 Casull too.  How does accuracy potential compare to the Marlin unit?   -Mike
Logged
Pages: [1]   Go Up
« previous next »