« previous next »
Pages: [1]   Go Down

Author Topic: Fulton shotgun woes  (Read 2049 times)

0 Members and 1 Guest are viewing this topic.

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Fulton shotgun woes
« on: January 30, 2008, 08:27:12 AM »
Hello
I have a s double barreled shot gun partially disassembled.
It's marked: The FULTON SPECIAL on one barrel
HUNTER ARMS CO. INC.  M'A'A'S'  FULTON,N.Y. U.S.A. on the other barrel
I have parts'illustrations from both Numrich and Stoeger,but both show individual springs for the sears,and my gun has a single sprig for both.
The best assembly aid that I have is for a Fox shotgun.
I know that there is a lot of different guns made by Hunter and Fulton.I hope that someone here has information about mine.
Thanks
Frank
Logged
Frank

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #1 on: January 31, 2008, 12:28:12 AM »
Hello,again
If I cancock the hammers,I can reassemble it without any further disassembly.
How do I cock the hammers on a Fulton Special?
I discovered how to cock an L C Smith.
Frank
Logged
Frank

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #2 on: February 01, 2008, 04:06:29 AM »
I cocked the hammers and re assembled the gun--without the sear spring.
It fell out when I removed the stock,so I don't know how it fits.
Any instructions that I  have,are for guns with individual springs for each sear.
I would appreciate any help from any one who has information about double barreled shotguns wit a single sear spring
Frank
Logged
Frank

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Fulton shotgun woes
« Reply #3 on: February 01, 2008, 05:39:49 AM »
Sorry I've only worked on a couple and I just don't remember any more. I can't even find a blow up on the internet.. I'll look in some of my parts diagrams and see if I find anything that can help..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Mckie Hollow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: Fulton shotgun woes
« Reply #4 on: February 01, 2008, 02:36:28 PM »
I have a Hunter Arms, Fulton Special. If You tell Me exactly what Your looking for, Maybe I can Take it apart and Post some Pictures. Only if The Kids will return The Camera!!
Logged

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: Fulton shotgun woes
« Reply #5 on: February 01, 2008, 03:10:56 PM »
I can't tell you for that model. I have one Fulton and it only says THE FULTON on the receiver. It was my Grandpa's and as a Kid I shot it a bunch but I haven't taken it apart it 30years and don't plan on it. If and when I do it will be getting a new blackwalnut stock and a new bluing.
Logged
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Fulton shotgun woes
« Reply #6 on: February 02, 2008, 01:37:28 PM »
Kragman71-- perhaps pictures would help with your dilemma? The only reference to that model shows 2 sears and 2 sear springs.. Is the spring a leaf or a coil? Since the spring fell out when you removed the butt stock are you sure it's the sear spring?? The parts diagrams show 2 versions and they are defined by whether the sear spring is a coil or a leaf.. also the sears are shaped differently. Box locks can be a handful to take down and put together!
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #7 on: February 03, 2008, 05:27:47 PM »
Quote from: Mckie Hollow on February 01, 2008, 02:36:28 PM
I have a Hunter Arms, Fulton Special. If You tell Me exactly what Your looking for, Maybe I can Take it apart and Post some Pictures. Only if The Kids will return The Camera!!
[/quote

Mickie
Thanks for the reply.
My Fulton special 12 gauge  has a single spring to actuate both sears.
The Numrich catalog shows one with a spring for each sear.
The sear is the long tapered part on the top of the receiver;facingto the rear.
You would have to remove the stock to see it.Be very careful.When I removed the stock,the spring fell out,and I don't know how it was installed.
Frank
Logged
Frank

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #8 on: February 16, 2008, 07:51:26 AM »
Hello,Everyone
I disassembled the Fulton,and took some pictures,as asked.
Before reassembling,I tinkered with it,as I had been doing for a heck of a time.
Within 10 minutes,I had the spring in the right .
I' may be slow,but stubborn.
Thanks again
rank
Logged
Frank

Offline Mckie Hollow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: Fulton shotgun woes
« Reply #9 on: February 16, 2008, 08:35:07 AM »
So Kragman, I guess You got it Fixed?
Logged

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #10 on: February 16, 2008, 10:55:50 AM »
MckieHollow
I'm really not sure.
Everything "looks" allright,but I can't engage the safety.It may just be that i'm not strong enough. Two years ago,my backbone collapsed onto my spinal cord and put me in the hospital for three months.I'm recovering,but at greatly reduced muscel strength.
I'm NOT crying;In three months,I saw a LOT of folks in worse shape,who won't get any better.
I'm doing just fine.
I must get a dummu rounds to use so I can test  the gun to check the action.
Frank
Logged
Frank

Offline Mckie Hollow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: Fulton shotgun woes
« Reply #11 on: February 17, 2008, 04:49:07 AM »
Kragman - I've always thought that I had a Safety problem with My Fulton Special, maybe not. This could be just a double safety. break the barrellls open and close it. This will cock it and push the safety "on safe". When I push the safety forward to the "off or fire position", it will not go all the way. pull the safety back to the "On safe position", then forward to the fire position, it will now work. This has always happened. I got the gun from My great uncle, and I don't think it was ever shot much, the bores are excellent. I think I looked this up once and it was made in the 20's or 30's. Hope this Helps.
Logged

Offline Kragman71

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 284
  • Gender: Male
Re: Fulton shotgun woes
« Reply #12 on: February 17, 2008, 01:17:45 PM »
Mickie Hollow
Thanks,every little bit helps.
I removed the safety spring and removed some of it's oomph.Now i can push it with my thumb.
But not when it's installed in the gun.The problem is the safety slide is bound by the stock.
Without the slide,the safety works fine.I'm going to assemble the gun without the safety slide,and see if the action works.
I'lle back
Frank
Logged
Frank
Pages: [1]   Go Up
« previous next »