« previous next »
Pages: [1]   Go Down

Author Topic: BARREL BAND  (Read 561 times)

0 Members and 1 Guest are viewing this topic.

Offline Woodchopper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
BARREL BAND
« on: February 14, 2008, 08:59:21 PM »
HELLO EVERYONE,
                         I'M INTERESTED IN PUTTING A BARREL BAND ON MY 45-70 HANDI-RIFLE.DO HAVE ANY OF YOU EVER DONE THIS AND IF SO WITCH ONE DID YOU USE AND WHO DO SUGGEST TO DO THE WORK ?I'VE SEEN SOME MADE BY TALLEY AND WOULD PROBABLY HAVE GANDER MOUNTAIN DO THE WORK FOR ME.ANY HELP WOULD BE GREATLY APPRECIATED.
                                                                                                                                                        THANKS,
                                                                                                                                                                     WOODCHOPPER
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: BARREL BAND
« Reply #1 on: February 15, 2008, 01:07:35 AM »
To save you a lot of money look into an Uncle Mikes (IIRC) barrel band, They are made for things like .22 rifles, Marlin and Winchester (lever actions, to be put on the magazine tube) and for shotguns. They are 2 pieces and tighten together with small socket head screws. I have had one on my .336 for many years with no problems. Midway or somewhere like that should carry them. They have been discussed here before so a search should ring up something....<><....:)


try this thread:

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=576603

they come in different diameters to fit different size barrels....
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: BARREL BAND
« Reply #2 on: February 15, 2008, 04:52:33 AM »
I am getting up there in the years so please excuse me if this is stupid. Were you talking a barrel band, the type that goes over the barrel and fore end to hold the fore end on or a swivel that attaches to the barrel? ???
Logged
Great men have vision and resolve to make dreams come true.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: BARREL BAND
« Reply #3 on: February 15, 2008, 05:53:59 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dave Weiss

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 222
  • Gender: Male
Re: BARREL BAND
« Reply #4 on: February 15, 2008, 03:49:11 PM »
When I get around to finishing my 45-70 I'll be getting the barrel band sold by Williams (the gunsight co.), part #QD-12 GA. "L" SET. They are a little more expensive than the Uncle Mikes, but I prefer the design.

>>>===> Dave
Logged
Hunt hard, shoot fast and trust your dog.

Offline Woodchopper

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: BARREL BAND
« Reply #5 on: February 15, 2008, 08:14:48 PM »
THANKS FOR THE RESPONSE.I WAS ACTUALLY THINKING OF THE TYPE YOU PUT OVER THE BARREL AND HAVE SOLDERED INTO PLACE JUST LIKE SOME OF BIG CALIBER SAFARI RIFLES.BUT IF YOU GUYS HAVE HAD GOOD LUCK WITH THE KIND THAT IS SCREWED DOWN INTO PLACE I WOULD DEFINITELY GIVE IT SOME CONSIDERATION.IT WOULD SAVE TIME AND MONEY.I AM JUST CONCERNED IT MAY COME LOOSE AND SCRATCH THE SURFACE OF THE BARREL.WHAT DO YOU THINK ?
                                                                                                        THANKS,
                                                                                                                     WOODCHOPPER
Logged
Pages: [1]   Go Up
« previous next »