« previous next »
Pages: [1]   Go Down

Author Topic: Which barrel for 30-40 Krag rechamber  (Read 622 times)

0 Members and 1 Guest are viewing this topic.

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Which barrel for 30-40 Krag rechamber
« on: March 09, 2008, 06:41:28 AM »
Which bbl would lend it's self better to the 30-40 Krag? The 30-30 or the 308 and do either of these bbl's come 24"? I don't plan on cast bullets but am thinking in the 180-220gr range with jacketed up to maybe 2500fps.Also what about extractor which would need less work?  Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline kenbev

  • Trade Count: (30)
  • Contributor
  • ***
  • Posts: 485
Re: Which barrel for 30-40 Krag rechamber
« Reply #1 on: March 09, 2008, 06:48:54 AM »
My 30-40 Krag barrel was originally a 30-30. I only use factory ammo and it shoots and kills real good.....
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Which barrel for 30-40 Krag rechamber
« Reply #2 on: March 09, 2008, 06:52:31 AM »
I think the 30-30 is the only viable candidate, the 30-40 case is smaller at the case head, .457" compared to .470" for the 308.

Tim

http://ammoguide.com/cgi-bin/aicompare.cgi?sn=fCKPKmURWg&loadset=23&xxglbl=1
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Which barrel for 30-40 Krag rechamber
« Reply #3 on: March 09, 2008, 07:16:34 AM »
my 30-40 barrel started life as a 30-30. It is exceptionally accurate and easy shooting (little felt recoil) and shoots honest 1" groups at 100 yards with factory ammo....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
Re: Which barrel for 30-40 Krag rechamber
« Reply #4 on: March 09, 2008, 07:52:37 AM »
     :)  Tim : I want to do this conversion from a 30-30 barrel to a 30-40 Krag or a 30-40 Krag Improved if it is not that much more trouble. If I understand the process correctly, cutting the chamber & cutting the throat are separate steps ?  Is the rim included when the chamber is cut ?  And what about the ejector or the extractor ?

    What are some good sources for reamers, & is rough & finish reaming needed ?

   I am a retired millwright so I have better than average machinist skills .  But I would want everything to come as true as possible . Can this conversion be well done in a garage or should it just go straight to a "smith" ?    :-\   Jim  THANKS
Logged
Jim

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Which barrel for 30-40 Krag rechamber
« Reply #5 on: March 09, 2008, 08:03:49 AM »
Jim, I haven't done a chamber ream myself yet, just throatings of three 45-70s and the 35 Rem, but give Fred Z a call at GBO sponsor 4D, he'll answer all your questions, you can rent the reamer from him too, the reason I posted the Ackley was the same thought you had, might as well ream to the improved chamber, costs the same. He doesn't list the Ackley reamer, but he may still have it. Several of us are waitin for a 460S&W reamer to get in his shop. ;D

Tim

http://www.4-dproducts.com/

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
Re: Which barrel for 30-40 Krag rechamber
« Reply #6 on: March 09, 2008, 08:38:58 AM »

    :)  Thanks Tim !  Now I know exactly how to proceed !  Jim   ::)

Logged
Jim
Pages: [1]   Go Up
« previous next »