Author Topic: Taurus 44 magnum  (Read 6074 times)

0 Members and 1 Guest are viewing this topic.

Offline corbanzo

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: Taurus 44 magnum
« Reply #30 on: March 03, 2008, 08:34:00 AM »
I've got a .44mag ultralite - and it is a handful! 

I'm not looking for something to conceal. I'm looking for a trail gun. How much should I expect to pay for the Ultralite? I'm not squeemish about recoil, but I'm assuming the Ultralite is something not mean't to be shot a lot. Also, is the Ultralite frame & cylinder Ti? If so, then it should be corrosion resistant - something I care about here in the PWW.
Thanks for the info.

Yes, it is corrosion resistant.  I have had it soaking wet for days in the holster, and it came out just fine with a little clean and lube.  I believe when I bought the ultralite it ran me about $550 or so....  I bought it for extended mountain trips, with multiple 10mile+ days. 

For a trailgun, the redhawk or the smith 629 with a 4" barrel seems like a good deal also, or look for an old SW model 29 with a shorter barrel, those are good trail guns.

If you are planning on putting some rock and roll loads through the gun, get either the ruger or the taurus, they can handle the hot loads.  Both the taurus RB and the 444ultralite are rated for the .44mag+p ammo. 
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline dla

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 140
Re: Taurus 44 magnum
« Reply #31 on: March 03, 2008, 03:18:32 PM »
I've got a .44mag ultralite - and it is a handful! 

I'm not looking for something to conceal. I'm looking for a trail gun. How much should I expect to pay for the Ultralite? I'm not squeemish about recoil, but I'm assuming the Ultralite is something not mean't to be shot a lot. Also, is the Ultralite frame & cylinder Ti? If so, then it should be corrosion resistant - something I care about here in the PWW.
Thanks for the info.

Yes, it is corrosion resistant.  I have had it soaking wet for days in the holster, and it came out just fine with a little clean and lube.  I believe when I bought the ultralite it ran me about $550 or so....  I bought it for extended mountain trips, with multiple 10mile+ days. 

For a trailgun, the redhawk or the smith 629 with a 4" barrel seems like a good deal also, or look for an old SW model 29 with a shorter barrel, those are good trail guns.

If you are planning on putting some rock and roll loads through the gun, get either the ruger or the taurus, they can handle the hot loads.  Both the taurus RB and the 444ultralite are rated for the .44mag+p ammo. 

Hard for me to get excited about 50oz revolvers for trail guns. I know they shoot nice, but they are heavy enough that you won't have them with you when you need them. My one and only 8 3/8" N-frame S&W would pull my pants down. I'm not going that route again. I've never shot anything based on the Raging Bull frame - do you need a step ladder to reach the trigger?

I'm also not going to load to stop armor-plated grizzlies. A 240gr JSP @1200fps is enough.

Offline corbanzo

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: Taurus 44 magnum
« Reply #32 on: March 03, 2008, 04:46:26 PM »
Yeah, that load is a good everyday bear stopper.  I used to use some 300grn JSP's for my .454.  I shoot almost all cast now. 

The raging bull does have a large grip, I have big hands so the grip fits me well, but my fingers aren't very long, so I couldn't have the trigger much farther away in double action.  The ultralite throws you off, because the frame is the same size, but it is only 28 oz's, which seems even less in comparison to the size.  But it's great for hiking and mountaineering.
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline roger460xvr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 156
  • Gender: Male
Re: Taurus 44 magnum
« Reply #33 on: March 08, 2008, 03:42:14 PM »
I love my grip on my taurus raging bull 44magnum.....roger

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: Taurus 44 magnum
« Reply #34 on: March 14, 2008, 11:06:33 AM »
try this taurus, model 44 44mag,not a tracker. it is ported.redhawk also now in 4"
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.