« previous next »
Pages: [1]   Go Down

Author Topic: Why doesn't Handi make a 32-20?  (Read 902 times)

0 Members and 1 Guest are viewing this topic.

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Why doesn't Handi make a 32-20?
« on: March 10, 2008, 04:29:21 PM »
I would think it would be a natural. I for one would love to see them bring one out. It would be a perfect small game/ varmint gun with a 20" barrel and those nice laminate stocks. Plus I could buy two barrels one to leave as 32-20 and the other for .303brit. ;D
It would really be the cats meow with a heavy barrel.
Logged
From the halls of Montezuma

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26980
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #1 on: March 10, 2008, 06:02:45 PM »
I think that would be because in the whole wide world there is next to no interest in the round and they figure they'd sell a dozen or less and set holding the rest until the metal turns to dust.  :o Marlin tried a run of them for CAS and even those didn't go over very well I don't think. It's a nice enough old round but it's dead as a doornail and there just is no interest in it's revival. We all have our personal favorites we'd love to see make a come back but for the most part we're out on a limb with no one else with us and it's just not economically feasible to supply them to us.

Mine is a .25-20 that ain't gonna happen either.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Why doesn't Handi make a 32-20?
« Reply #2 on: March 10, 2008, 06:17:44 PM »
25-20 would be nice to. :(
The problem with CAS was the 32 in a hangun was a bit light for some of the targets. Even the 38 can be to light if you load it down to much. The price was another thing the average Joe didnt want to buy a 32-20 cowboy at almost $500 when they could get a 336 in 30-30 or 35rem for under $400. The cowboy is a nice gun dont get me wrong but it was a little pricey to buy for the kids or as some thing most folks would want to drag around the woods. I think a Handi would have a chance in 32-20 at say the average price for a barrel is around $90 to get from their barrel program. I for one would have no problems getting a youth model for my boys and a full size version for myself at the $280 price that I can get a new one for in these parts. Just my thoughts.
Logged
From the halls of Montezuma

Offline GregP42

  • Global Moderator
  • Trade Count: (6)
  • A Real Regular
  • *****
  • Posts: 752
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #3 on: March 11, 2008, 05:07:26 AM »
The other problem with the Marlin they made for CAS was that it had microgroove rifling. It didn't shoot cast bullets worth a dang. As for 32-20, I love the round, I have one of the few Dan Wesson's made in 32-20, I have another pistol called a SSP-86, it was a single shot that I used in the unlimited class IHMSA. Won me a couple of state championships in my class with it. And I have my great grandfather's Winchester 92 short rifle in 32-20. I have been looking for them to maybe make one in .32 H&R Mag. then I could just rechamber it to 32-20. And Bill, the .25-20 is a great round too, as well as the .218 bee, but we are not going to see to many of them around.

Greg
Logged
NRA Life Member
"Those who sacrifice essential liberty for temporary safety are not deserving of either liberty or safety."  - Ben Franklin, 1776
Vis Sis Mis!

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Why doesn't Handi make a 32-20?
« Reply #4 on: March 11, 2008, 03:37:49 PM »
I also love the 32-20. At the current time I have an original WIN 1873 full oct., an original WIN. 1885 low wall full oct.,an old 12" TC bull, and I also have one of the few DAN WESSONS.
It a great round.   

LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Why doesn't Handi make a 32-20?
« Reply #5 on: March 11, 2008, 03:41:14 PM »
I forgot, I also have a RUGER BUCKEYE SPECIAL in 32-20 - 32H&R MAG


LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #6 on: March 11, 2008, 03:56:39 PM »
I've got an old Remington rolling block in 32-20 and the last time i went to get ammo the guy said load up there wont be any more,he made me a deal on what he had left and i got the dies to reload. Great round for anything up to and including deer
Logged
the nation that forgets it defenders will itself be forgotten

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #7 on: March 11, 2008, 04:00:57 PM »
"microgroove rifling. It didn't shoot cast bullets worth a dang."

How long will this myth persist?
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #8 on: March 11, 2008, 04:05:43 PM »
Quote from: Swampman on March 11, 2008, 04:00:57 PM
"microgroove rifling. It didn't shoot cast bullets worth a dang."

How long will this myth persist?
It was designed for lead and was the hot ticket in old 22's
Logged
the nation that forgets it defenders will itself be forgotten

Offline GregP42

  • Global Moderator
  • Trade Count: (6)
  • A Real Regular
  • *****
  • Posts: 752
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #9 on: March 15, 2008, 08:56:45 PM »
Quote from: Swampman on March 11, 2008, 04:00:57 PM
"microgroove rifling. It didn't shoot cast bullets worth a dang."

How long will this myth persist?


Well,

On this rifle they would not shoot, tried .311 .312 and .313 sized bullets in it, #2 alloy, wheel weight and lynotype. None of them shot worth a dang out of it. I have another Microgroove in .41 mag that loves cast bullets. I wonder if it has to do with the bore size in conjunction with the microgroove barrels. Larger ones seem to shoot fine, but not the small bores I have dealt with. Have you gotten to shoot a small bore Marlin with a microgroove barrel and gotten good accuracy out of it? This one would shoot jacketed bullets just fine. If it had shot cast as good as it shoot the jacketed bullets I would have kept it.

Greg
Logged
NRA Life Member
"Those who sacrifice essential liberty for temporary safety are not deserving of either liberty or safety."  - Ben Franklin, 1776
Vis Sis Mis!

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #10 on: March 16, 2008, 02:43:39 AM »
Question - "Have you gotten to shoot a small bore Marlin with a microgroove barrel and gotten good accuracy out of it?"


Answer   -  yes I have, I currently have a couple of them, they are VERY accurate with lead bullets and they are both smallbores (.22's)....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #11 on: March 16, 2008, 03:36:51 AM »
Where in my post did I say the bullets were too hard?
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Re: Why doesn't Handi make a 32-20?
« Reply #12 on: March 16, 2008, 09:39:22 AM »
Hey, there's a local dealer here clearing out a bunch of odd stuff, I'm positive there's a bunch od 32-20 brass in there.  If anyone's interested I'll have another look for more info for ya.
Logged
God, Family, and guns, in that order!

Offline Roudy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 206
Re: Why doesn't Handi make a 32-20?
« Reply #13 on: March 16, 2008, 12:20:33 PM »
I just read an article in one of the magazines I subscribe to about a new cartridge.  Seems like every month someone invents a new cartridge and firearm to go along with it.  At any rate this new cartridge is called a .327.  At first I thought it was made for a chevy engine, but upon reading the article it is a 32 H&R Magnum with the case srtetched 1/8" and loaded such that the power range was a near duplicate of the .357 Magnum.

For those looking for a nice little plinking round this seems like it would do well......of course we already have the .357 ::)

Roudy
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #14 on: March 16, 2008, 12:26:37 PM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline ironglow

  • GBO Supporter
  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 31609
  • Gender: Male
Re: Why doesn't Handi make a 32-20?
« Reply #15 on: March 16, 2008, 12:36:11 PM »
  Probably even less chance now than ever, with the recent change in ownership for Marlin/H&R !
Logged
If you don't want the truth, don't ask me.  If you want something sugar coated...go eat a donut !  (anon)

Offline Odinbreaker

  • GBO Supporter
  • Trade Count: (8)
  • Avid Poster
  • *****
  • Posts: 213
Re: Why doesn't Handi make a 32-20?
« Reply #16 on: March 16, 2008, 01:59:52 PM »
It just may be that some thing need to Die out.
Logged
Working hard to go Broke!
Pages: [1]   Go Up
« previous next »