« previous next »
Pages: [1]   Go Down

Author Topic: blackhawk scope mounts  (Read 582 times)

0 Members and 1 Guest are viewing this topic.

Offline zacharoo

  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 546
blackhawk scope mounts
« on: March 18, 2008, 02:32:08 AM »
I would like to mount a scope on my 45 blackhawk. IT has a 71/2 barrel. What is the best mount they make that you don't have to drill and tap? I will mount a 2 power scope on it.
Logged

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: blackhawk scope mounts
« Reply #1 on: March 18, 2008, 04:13:07 AM »
if you find one let me know. i had 2 bsquares that clamp onto barrel and i ended up throwing them out. on my gp i got one of the best no drill and tap mounts i ever had.
the mount uses the rear sight hole and a replacement for the front sight is installed,
the new blade has a hole  for the front screw to pss thru and screws into the front part of the mount. then there are about 3 screws that tightened the hole package down.
i've shot a bunch of top end loads and the mount hasn't budged.
unforunately, the company is not open for business anymore,but i think bsquare is producing something similar. good luck dan
Logged
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: blackhawk scope mounts
« Reply #2 on: March 20, 2008, 08:44:35 AM »
I have one of the B-Square barrel mounted scope mounts and have used it on two Rugers and several T/C barrels without a problem.  44 Mag with 300 grain bullets moved it a little.  I tightened it a little and it was fine.  Used a Leupold 2x LER scope and did OK.  A friend tried it on his 44 with a larger scope and had problems.  May have been the weight of the heavier scope.  I don't know.

Steve  :)
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: blackhawk scope mounts
« Reply #3 on: March 30, 2008, 12:08:26 PM »
I had a B-square mount on 41Mag Blackhawk for a while and I tightened the screws on it to the point of almost stripping them and still couldn't keep it from moving.  Bought a Weigand mount and drilled and tapped the top strap and the scope hasn't moved since.
Logged
Pages: [1]   Go Up
« previous next »