« previous next »
Pages: [1]   Go Down

Author Topic: S&B brass?  (Read 395 times)

0 Members and 1 Guest are viewing this topic.

Offline aldar

  • Trade Count: (16)
  • Avid Poster
  • **
  • Posts: 246
S&B brass?
« on: April 05, 2008, 01:52:17 PM »
anyone have any comments, good or bad, on Sellior&Bellot brass? ever reloaded any and have any problems?
Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: S&B brass?
« Reply #1 on: April 05, 2008, 03:23:50 PM »
I use it for .38, .357 and 7.62X25, Work well as any only one I had trouble with was the 7.62 but it can be a bear to load anyhow. Got some 9MM I'll be trying soon don't expect any trouble out of it thou.

Oh I forgot I've loaded some 7X57 and 8MM with it work just fine.
Logged
Badnews Bob
AE-2 USN retired

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: S&B brass?
« Reply #2 on: April 05, 2008, 03:47:36 PM »
Hey aldar, I've got some S&B 45 acp brass that I have loaded several times with no problems.

GOOD SHOOTING!
Slufoot
Logged

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: S&B brass?
« Reply #3 on: April 05, 2008, 04:47:14 PM »
I've reloaded some 9mm S&B and the only thing I've noticed is the primer pocket crimp can leave a sharp edge that can cause troubles with priming but a quick hit with a chamfer tool cleans it up to make priming easy.


Bill
Logged

Offline Sweet 6.5

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 373
  • Gender: Male
Re: S&B brass?
« Reply #4 on: April 05, 2008, 08:29:29 PM »
Hi

Used them in 6.5x55 without any problems

Sweet
Logged

Offline Czech_too

  • Trade Count: (24)
  • Contributor
  • ***
  • Posts: 350
  • Gender: Male
Re: S&B brass?
« Reply #5 on: April 06, 2008, 12:27:35 AM »
My only experience with S & B is in the 22 Hornet, found the primer flash hole to be undersized.  Kept pulling the decapping pin out of the rod.  Sorta a PITA, after about the 4th time I just put that brass to the side.  Thankfully there's only 20 of them.
Logged
NRA Life Member
Cruffler
INOA

genealogy, another area of interest
Pages: [1]   Go Up
« previous next »