« previous next »
Pages: [1]   Go Down

Author Topic: 38 spcl 125 gr W231 or HP38 options  (Read 394 times)

0 Members and 1 Guest are viewing this topic.

Offline CIG

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
38 spcl 125 gr W231 or HP38 options
« on: April 22, 2008, 08:08:53 AM »
Shoot a Ruger Security 6 .357 with 6 inch bull barrel.  38 Specials - Remington cases. Magnus no.513 125 gr RNFP cowboy .357 diameter bullets.  W231 powder and CCI primers. 
My Speer 13 manual has nothing in cast bullets for loads.  Anyone have a manual that gives me a load range for this powder/bullet combo?  Other sites give pet loads from 3.2 to 5.8.  Don't want to start too low and not too high for leading problems, which I have had before with SWC's.  Thanks.
Logged

Offline CIG

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
Re: 38 spcl 125 gr W231 options
« Reply #1 on: April 25, 2008, 08:00:05 AM »
I read that HP38 is the same powder as W231 and I can find data for that.  Min. 3.8 grains and Max. 4.8.  Can anyone confirm that as true and thus safe? 
Logged

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: 38 spcl 125 gr W231 or HP38 options
« Reply #2 on: April 25, 2008, 08:25:41 AM »
CIG

Hodgdon's list the same powder charges for W231 on their web site so you should be good .

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped
Pages: [1]   Go Up
« previous next »