www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
357 ??
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: 357 ?? (Read 459 times)
0 Members and 1 Guest are viewing this topic.
GameHauler
Trade Count:
(
49
)
A Real Regular
Posts: 867
Gender:
Thank you Every One for Positive Feedback
357 ??
«
on:
July 06, 2008, 10:00:58 AM »
Loading up some 357 magnum loads and have a question.
I will be using Bulleye because I have 3# of it.
I went to Alliants web site and they show a charge of 9 grains.
I look in the Lyman manual and the show a start load of 7 grains
with a max of 9.7
what do you think? Go with Alliants 9 grains
Oh ya! 110 gr JHP
Mike
Logged
Mike
Graybeard
Administrator
Trade Count:
(
69
)
Senior Member
Posts: 26939
Gender:
Re: 357 ??
«
Reply #1 on:
July 06, 2008, 10:48:43 AM »
I learned long ago when I used my S&W Model 19 in competition that 6.5 grains of Bullseye and a Hornady 125 grain bullet was as accurate a load as I could find in the .357 Magnum. It's not a max load by any means but is fast enough to do anything a 125 grain will do and has been very accurate in every .357 Magnum gun I've owned since.
If I were you I'd stop worrying about max loads and find an accurate one. I suspect that's gonna come at less than maximum powder charge.
Logged
Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125
I am not a lawyer and do not give legal advice.
Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!
GameHauler
Trade Count:
(
49
)
A Real Regular
Posts: 867
Gender:
Thank you Every One for Positive Feedback
Re: 357 ??
«
Reply #2 on:
July 06, 2008, 11:01:00 AM »
Thanks Graybeard.
I am not trying to get max loads,
I am just getting my feet wet with the components I have on hand.
I was mostly confused as why there was 2 grains difference.
I am guessing that since Alliant does not list a start load or max
that they have found 9 grains to be the all around best and safe.
Thanks again,
Mike
Logged
Mike
stimpylu32
Moderators
Trade Count:
(
67
)
Senior Member
Posts: 6062
Gender:
Re: 357 ??
«
Reply #3 on:
July 06, 2008, 11:41:42 AM »
GH
If you read the last few lines in this link , you will see were Alliant says to reduce their data by 10% for a starting load , So 9gr vs 9.7gr is not that far off .
http://www.alliantpowder.com/reloaders/Index.htm
Also as Bill said , you will in most cases find the sweet spot well before MAX .
stimpy
Logged
Deceased June 17, 2015
If i can,t stop it with 6 it can,t be stopped
GameHauler
Trade Count:
(
49
)
A Real Regular
Posts: 867
Gender:
Thank you Every One for Positive Feedback
Re: 357 ??
«
Reply #4 on:
July 06, 2008, 11:55:19 AM »
Thanks Stimpy.
The way I read that is I should be starting with 8.1
I had read that before but it was swimming around
in the murky waters of all the info I am trying to ingest.
Logged
Mike
jhalcott
Trade Count:
(
1
)
Senior Member
Posts: 1869
Re: 357 ??
«
Reply #5 on:
July 06, 2008, 04:01:10 PM »
my old Speer #11 manual ,page 406, has 7.5 minimum and 8.5 maximum with the 110HP. The gun used is a 6" Security Six!
Always start low and work up!
Logged
Savage
Trade Count:
(
0
)
Senior Member
Posts: 4397
Re: 357 ??
«
Reply #6 on:
July 07, 2008, 05:49:45 AM »
If you're looking for accuracy, I'd start down at 6.5 grs like Graybeard suggested. If the load proves accurate in your gun, you'll load about 300 more rounds per pound of powder, and save some wear on you and your gun.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Ammo/Hand Loading Forums
»
Hand Loading for Rifles and Handguns
»
357 ??