« previous next »
Pages: [1]   Go Down

Author Topic: ultra slug hunter 12 gauge scope ring screw torque??  (Read 354 times)

0 Members and 1 Guest are viewing this topic.

Offline FASTMIKE0721

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
  • Gender: Male
  • GUN CONTROL MEANS HITTING YOUR TARGET!
ultra slug hunter 12 gauge scope ring screw torque??
« on: September 14, 2008, 10:10:06 AM »
quick question

how tight do the top halves of the scope rings need to be??

ush 12 with bushnell trophy 3x9x40 using low rings with 1 allen on each side / 1" wide rings

I got them TIGHT prob toooo tight  but did not squash tube...  is that ok????  it kicks hard and i dont wanna waste another $20-30, to set up and test again!!!!

                                                          MIKE

                                       
Logged
07 H&R ULTRA SLUG DEL 12 WITH BUSHNELL TROPY 3X9X40
06 S&W 629 CLASSIC 8.375 WITH 2X7 BURRIS POSILOCK
CVA STAGHORN INLINE 50CL. WITH TASCO WORLDCLASS 3-9
MOSSBERG 500A SMOOTHBORE SLUGSTER
HORTON YUKON SL 150 COMPOUD CROSSBOW--LS MX EXP

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: ultra slug hunter 12 gauge scope ring screw torque??
« Reply #1 on: September 14, 2008, 11:53:52 AM »
Depends on the size of the screw, Leupold recommends that 6-48 screws in a ring or base be tightened to 18 in.-lbs. and 8-40 screws be tightened to 28 in.-lbs.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline FASTMIKE0721

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
  • Gender: Male
  • GUN CONTROL MEANS HITTING YOUR TARGET!
Re: ultra slug hunter 12 gauge scope ring screw torque??
« Reply #2 on: September 14, 2008, 01:38:10 PM »
thank you

I think its all good i belive

I will let you know how the next session works out

thanks to every one that has anwered all my questions on gb  it means a heck of a lot to me!!!!

                                                                                         Mike
Logged
07 H&R ULTRA SLUG DEL 12 WITH BUSHNELL TROPY 3X9X40
06 S&W 629 CLASSIC 8.375 WITH 2X7 BURRIS POSILOCK
CVA STAGHORN INLINE 50CL. WITH TASCO WORLDCLASS 3-9
MOSSBERG 500A SMOOTHBORE SLUGSTER
HORTON YUKON SL 150 COMPOUD CROSSBOW--LS MX EXP
Pages: [1]   Go Up
« previous next »