« previous next »
Pages: [1]   Go Down

Author Topic: .444 Marlin loads  (Read 522 times)

0 Members and 1 Guest are viewing this topic.

Offline walkingwolf

  • Trade Count: (4)
  • Member
  • *
  • Posts: 71
  • Gender: Male
.444 Marlin loads
« on: March 07, 2007, 07:58:47 AM »
  Hi, Any have a good load for a 300 gr. bullet in the .444.?  I am building a bolt action.
Logged
Don't smoke in bed the Assh you save may be your own

Offline bigjeepman

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1108
  • Gender: Male
Re: .444 Marlin loads
« Reply #1 on: March 07, 2007, 08:34:03 AM »
Welcome walkingwolf ...
Logged
5 Rules for Happiness
free your heart from hatred ... free your mind from worries ... live simply ... give more ... expect less

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
Re: .444 Marlin loads
« Reply #2 on: March 07, 2007, 11:30:06 AM »
I use a max load of H322 in my Encores with a 300gr Sierra JSP. Really accurate load.   KN
Logged

Offline Slufoot

  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1004
Re: .444 Marlin loads
« Reply #3 on: September 28, 2008, 05:02:10 PM »
Quote from: KN on March 07, 2007, 11:30:06 AM
I use a max load of H322 in my Encores with a 300gr Sierra JSP. Really accurate load.   KN

Have you taken any game with this load?
If so, what was it and how did the bullet perform?
Thanks!
Slufoot
Logged

Offline GatCat

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 666
Re: .444 Marlin loads
« Reply #4 on: September 30, 2008, 02:52:12 AM »
WalkingWolf, if you don't mind my asking, what bolt action are you using for the .444 you're building? I don't mean to hijack this thread, I'm just curious, as I've been toying with the thought of rebarreling a Dutch Mannlicher ( Sp??) to the .444. The cartridges & rims seem to fit fine in the en-bloc clips.
Mark
Logged

Offline adirondacker

  • Trade Count: (26)
  • Contributor
  • ***
  • Posts: 459
Re: .444 Marlin loads
« Reply #5 on: September 30, 2008, 04:36:57 PM »
i load a 300 grn xtp for my marlin,i am not sure how well it will feed in a bolt gun,but they work real nice out of a lever.i use h335 powder,i don't recall the load but i remember the velocity to be chrono'd around 1950,that bullet performs very well and retains good mass.i use the 240 grn in all my 44 mag deer loads.good luck with the project,adker
Logged
Pages: [1]   Go Up
« previous next »