« previous next »
Pages: [1]   Go Down

Author Topic: ruger no. 1  (Read 2135 times)

0 Members and 1 Guest are viewing this topic.

Offline samson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
ruger no. 1
« on: November 22, 2002, 01:21:15 PM »
:wink: My ruger no.1 wont shoot a decent group I get two shots touching, but the third round always goes about five inches high! Anyone have any ideas as to what the problem is?
Logged
When someone shows you how they really are, beleive them.

Offline savageT

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1594
ruger no. 1
« Reply #1 on: November 22, 2002, 01:58:28 PM »
It sure sounds as though you've got a classic example of barrel and stock contact when it heats up.  Try running a dollar bill between the barrel and stock to check for tight spots that could cause the stringing.
Have you checked the mounting screws?  You might want to call/write Sturm Ruger about their recommended procedure is for tightening the action to the stock.
JimT
Logged
savageT........Have you hugged a '99 lately?

Of all the things I've lost in my life, I miss my mind the most.

Offline samson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
ruger no. 1
« Reply #2 on: November 22, 2002, 05:44:29 PM »
:D Thanks for the info Savage, I will check the screw on the bottom of the forarm, that could be a problem area. :D
Logged
When someone shows you how they really are, beleive them.
Pages: [1]   Go Up
« previous next »