Author Topic: new elk barrel  (Read 1737 times)

0 Members and 1 Guest are viewing this topic.

Offline shooterpunk

  • Trade Count: (0)
  • Member
  • *
  • Posts: 45
Re: new elk barrel
« Reply #30 on: November 08, 2008, 07:41:32 AM »
That is some good readin, thanks banjoman

Offline EdK

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 499
Re: new elk barrel
« Reply #31 on: November 08, 2008, 10:10:01 AM »
I thought the original post was reasonable: Handgun for elk @ 200yds. I think 300yds is pushing it though. Elk are not bullet proof and a 375 JDJ is a lot of gun but...

Offline Darrell H

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 240
Re: new elk barrel
« Reply #32 on: November 08, 2008, 10:19:29 AM »
shooterpunk here is something else that you can consider.  It's a 17" (including brake) .376 Steyr from MGM.  Factory cases and ammunition are available from Hornady.  I'm getting 2600 fps with 225 grain Hornady bullets and 2400 fps with 270 grain Hornady's. I wouldn't hesitate to shoot at an elk at 300 yards from a good rest with my 225 grain Hornady load.  Good luck with whatever you decide! 




 

Offline shooterpunk

  • Trade Count: (0)
  • Member
  • *
  • Posts: 45
Re: new elk barrel
« Reply #33 on: November 08, 2008, 12:00:22 PM »
I love the look of that barrel and the ballistics of that .376 steyr, like a .375 JDJ but a little more power, i like it.

Offline shooterpunk

  • Trade Count: (0)
  • Member
  • *
  • Posts: 45
Re: new elk barrel
« Reply #34 on: November 09, 2008, 12:04:41 PM »
Well I am getting a .308 barrel, thanks to Darrel H.  Thanks for all the info guys, I really appreciate it!

Offline reelhook

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 157
Re: new elk barrel
« Reply #35 on: November 09, 2008, 01:41:33 PM »
You might want to look at te 338 Federal-great round and factory ammo is available in about 5 loads

Offline Greenmtnboy66

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
Re: new elk barrel
« Reply #36 on: November 10, 2008, 08:52:02 AM »
explain to me how to form 375 JDJ brass from the .444 please.  do you just run the .444 brass through the .375 JDJ die?

Yes it's that simple. Be sure to lube it tho so it doesn't stick.

yup,
I have been lubing the inside of my cases for some time now.
I lube every 5th one than after all my case prep is done I toss em into the tumbler to get off any unwanted lube so I don't foul my powder.