Hi All,
Thought you might like to know that I finally got around to loading some of that new 6mm brass from the new Remington green packaging. I took 25 pieces from a bag of 50 to load for todays range visit. Looking at the brass there was a slight burr around the rim so I deburred them inside and out then sized them before measuring the lengths. I usually trim them to a common length but on measuring a sample of the 25 sized none were found to be incorrect and the variation was only 0.001"
Yeah that's right on One Thousanth of an inch difference so I just primed and loaded them.
Remington are to be congratulated on this brass
all that needs to be seen now is how well they last.
