Author Topic: 44 vs 445 barrel twist  (Read 834 times)

0 Members and 1 Guest are viewing this topic.

Offline Cowboybart

  • Classified -- Banned
  • Trade Count: (50)
  • A Real Regular
  • *
  • Posts: 628
44 vs 445 barrel twist
« on: December 01, 2008, 03:03:54 AM »
Is there a different twist rate between the factory 44 mag barrels and the factory 445 barrels?
Some is Good - More is Better - Too Much is Just Right

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4852
Re: 44 vs 445 barrel twist
« Reply #1 on: December 01, 2008, 01:07:21 PM »
I've compared them, and they both look identical. Which I believe to be 1-18. At least that's what a couple of my owners manual say. gypsyman
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman

Offline Cowboybart

  • Classified -- Banned
  • Trade Count: (50)
  • A Real Regular
  • *
  • Posts: 628
Re: 44 vs 445 barrel twist
« Reply #2 on: December 01, 2008, 03:48:30 PM »
The factory wants an extra $10 for the 445 barrel.  I know the 44 mag barrel will screw into a 445 frame - tried it.
Some is Good - More is Better - Too Much is Just Right

Offline Reed1911

  • GBO Sponsor
  • Trade Count: (18)
  • Senior Member
  • *****
  • Posts: 1332
    • www.reedsammo.com
Re: 44 vs 445 barrel twist
« Reply #3 on: December 02, 2008, 02:25:00 PM »
The only difference I see is a slight difference in length and of course the shroud is different, otherwise they are close enough to be switched.
Ron Reed
Reed's Ammunition & Research
info@reedsammo.com
www.reedsammo.com

Offline Cowboybart

  • Classified -- Banned
  • Trade Count: (50)
  • A Real Regular
  • *
  • Posts: 628
Re: 44 vs 445 barrel twist
« Reply #4 on: December 15, 2008, 04:17:28 AM »
I am using a 44 shroud that I milled out the ejector rod slot to allow for the longer 445 ejector rod.  If there is a difference in length then I had better get the 44 mag barrel, as that is what the shroud is for.
Some is Good - More is Better - Too Much is Just Right