Author Topic: Loading Sabots with Lube  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

Offline jd45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 537
Loading Sabots with Lube
« on: December 10, 2008, 04:39:12 PM »
Hello & Merry Christmas! Does anyone who uses these, for example the Hornady SST/ML which I'm experimenting with in my Lyman GPH, think that lubing the outside surface of the sabot aids in loading, as opposed to running it dry down the bore? A shooting buddy of mine suggested I might use Bore butter. Would there be any effect on accuracy, one way or the other? I'd appreciate your thoughts on the subject, & thanx. BTW, I'm attempting to get this rifle to be a flat-shooting 100YD gun with this or some other projectile combo. jd45

Offline jd45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 537
Re: Loading Sabots with Lube
« Reply #1 on: December 10, 2008, 04:43:22 PM »
I should add that up to now I 've been using the Hornady Great Plains .50-cal, 385GR-HP conicals at no more than 50YDS, which BTW, shoot VERY well in the rifle, up to that distance. jd45 

Online Casull

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4695
  • Gender: Male
Re: Loading Sabots with Lube
« Reply #2 on: December 10, 2008, 06:25:32 PM »
I've never lubed the outside of the sabot, but I have always filled the rear hollow with lube (usually shortening, but the last couple of times Bore Butter).  Don't think it helps with the loading of the current round, but seems to keep the fouling softened for the next round.  Never seem to hurt accuracy either.  BTW, the shortening seems to work just as well as the Bore Butter and is a hell of alot cheaper.
Aim small, miss small!!!

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Loading Sabots with Lube
« Reply #3 on: December 11, 2008, 03:34:06 AM »
I did it when I was shooting my Encore with triple7 powder. Worked good for me.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline ronbow

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
  • Gender: Male
Re: Loading Sabots with Lube
« Reply #4 on: December 11, 2008, 05:26:08 AM »
According to T/C Omega manual sabots are specifically designed to be used in a dry barrel without lube. In fact the manual warns against lubing sabots.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Loading Sabots with Lube
« Reply #5 on: December 11, 2008, 05:29:26 AM »
I wouldn't use lube.  It's not necessary and makes the gun harder to clean.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline DennyRoark

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 501
  • Gender: Male
    • The Ohio Outdoorsman
Re: Loading Sabots with Lube
« Reply #6 on: December 11, 2008, 06:37:17 AM »
My TC 45 XR Black Diamond shot terrible groups with bore butter swabbed out from the barrel.  After 15 shots or so it would settle down and shoot great.  Quit using BB and it became a tack driver.  Just my experience.  Play around with it and see.
Denny Roark
Member of PETA (People Eating Tasty Animals)
The Second Amendment...the one that makes all the others possible
I have no problems with vegetarians...I eat them regularly-Ted Nugent
"The beauty of the second amendment is that it will not be needed until they try to take it." -Thomas Jefferson

Offline jd45

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 537
Re: Loading Sabots with Lube
« Reply #7 on: December 11, 2008, 07:09:30 AM »
Thanx guys. Have sabots........will play, (and report results). jd45

Offline 12ptdroptine

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 308
Re: Loading Sabots with Lube
« Reply #8 on: December 13, 2008, 10:36:35 AM »
shooting the barrel completely dry will give the best accuracy... That came straight from the ppl at Hogdon powder.