Author Topic: Knight MK-85 (picture added)  (Read 2183 times)

0 Members and 1 Guest are viewing this topic.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Knight MK-85 (picture added)
« on: December 06, 2008, 08:18:35 AM »
I picked up a stainless MK-85 at the gun show in good condition for a really good price. If I converted it to 209 priming can I shoot BH209 in it? Anything special I need to know about this gun?

Anyone have a spare breech plug tool?
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: Knight MK-85
« Reply #1 on: December 06, 2008, 11:31:47 AM »
I've read where BH209 is not recommended in them, or any plunger type muzzleloader. Haven't tried it in mine, got an Extreme and a new Accura for that. Which breech plug are you using, slotted or hex head. I think I have an extra slotted if thats what you need. Let me know if I can help.
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85
« Reply #2 on: December 06, 2008, 11:41:35 AM »
It's slotted, PM sent.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #3 on: December 14, 2008, 05:00:11 AM »
I added a new Bushnell Banner 1.5-4.5X32, Weaver rings & bases, and a sling off an NEF Turkey Gun.  Total investment including new scope & mounts is less than $200.00.

"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline tominohio

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Re: Knight MK-85 (picture added)
« Reply #4 on: December 24, 2008, 02:26:53 AM »
Nice looking gun!!

I have a .54 cal MK-85 with the 209 conversion. I shoot 100gr loose 777 and Hornady Great Plains conical bullets.

Keep in mind you should protect your scope from blowback. It will burn the bluing off your scope. I wrap my scope with leather just above the nipple.

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Re: Knight MK-85 (picture added)
« Reply #5 on: December 30, 2008, 12:37:46 PM »
Swamp, have you shot it alot yet?
hows it shoot, hard to clean?

do you have to take the stock off to clean?

 ???
Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #6 on: December 30, 2008, 12:47:40 PM »
I haven't shot it yet, but I don't plan on removing the stock to clean it.  If you did that you'd have to resight it in.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline moto357

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 196
Re: Knight MK-85 (picture added)
« Reply #7 on: December 30, 2008, 04:41:36 PM »
Although not knights, stocks come off my guns for cleaning, no need to re-sight the gun in.  I do take care to make sure all fasteners are of consistant torque from cleaning to cleaning.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #8 on: December 30, 2008, 04:47:37 PM »
Totally unnecessary.......
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #9 on: December 30, 2008, 05:31:11 PM »
I haven't shot it yet, but I don't plan on removing the stock to clean it.  If you did that you'd have to resight it in.

Good luck with that, I have had a MK-85 for 20+ years, and I have shot mine. Try giving it a hot soap and water bath to wash out that Black Powder and Pyrodex without removing the barrel from the stock. For someone that has never shot and cleaned a MK-85 before, you sure seem pretty sure how it is done.

Good luck with your Windex cleaning your corrosive powders. Then again, if you never shoot it and just talk about it, anything will work. Yes your stainless will rust.
U.S.A.F. Veteran
NRA Life Member

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #10 on: December 31, 2008, 12:27:56 AM »
I've been shooting & building muzzleloaders since 1977.  I've been shooting inlines (blued & stainless) since the early 90s.  No soap and water is needed (ever) with either type.  Tepid water, Windex, or windshield washer fluid works perfectly.  Barrel removal is ok for Hawken breeched type muzzleloaders.  It's dumb with any other type.

I've been doing it my way for many many years.  I can have my guns spotless in 15 minutes.  You can waste your time with old school (supposedly traditional) methods if you like.  I don't have any to waste.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #11 on: December 31, 2008, 04:57:55 AM »
I've been shooting & building muzzleloaders since 1977.  I've been shooting inlines (blued & stainless) since the early 90s.  No soap and water is needed (ever) with either type.  Tepid water, Windex, or windshield washer fluid works perfectly.  Barrel removal is ok for Hawken breeched type muzzleloaders.  It's dumb with any other type.

I've been doing it my way for many many years.  I can have my guns spotless in 15 minutes.  You can waste your time with old school (supposedly traditional) methods if you like.  I don't have any to waste.

IF you ever shoot that MK-85 with Black Powder or Pyrodex, you will see what I am talking about. The blowback fouling WILL migrate down into the trigger, between the action/barrel and stock. After that happens, its only a matter of a couple days and your stainless will have pits in it. I have seen the results of what happens when the stock is not removed for cleaning, not my rifles, but others.

I am not saying you have to clean with soap and water, your Windex will clean it, but it can't clean what it can't get to. If you think you can clean a MK-85 without removing the stock, you WILL have corrosion between the stock and action, guaranteed. Just running a few Windex patches down the bore isn't going to cut it. Like I said, good luck!
U.S.A.F. Veteran
NRA Life Member

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Knight MK-85 (picture added)
« Reply #12 on: December 31, 2008, 03:26:02 PM »
I'd never trust a gun in the woods that had been disassembled and not test fired from a bench after reassembly.  I guess I'll have to sell it.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline Foggy

  • Trade Count: (40)
  • A Real Regular
  • ****
  • Posts: 749
  • Gender: Male
  • If you die first we're going to split up your gear
Re: Knight MK-85 (picture added)
« Reply #13 on: January 03, 2009, 03:38:17 AM »
+1 Busta
there is a method for testing early knights  by using the bolt safety as as  stop  so the trigger can release but the striker (or what ever you want to call it) can't contact the nipple.
I used to manage the blackpowder dept of a small (only 12 employees)gun/ hunting supply store. at that time the knights really took off in the early 90's (the beginning of the end of muzzleloader seasons). and i took care of the owners and several others Mk85s, fine rifles.when zeroing and plinking I would  take the stock off and clean the trigger group also. dry with a hair dryer and lube with sweet oil. I did not use the Breech plug grease i used TC bore butter.  the point of this rambling is when target shooting a complete out of stock  cleaning. During hunting season just the barrel . but a full cleaning afterward
Walk softly carry a big stick and never walk away  T.R.