Author Topic: Have troubles with one encore  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

Offline davidjdj

  • Trade Count: (0)
  • Posts: 1
Have troubles with one encore
« on: January 03, 2009, 06:25:46 PM »
I have several tc gun 2 encores G2 older contender. My problem is that I have had two stocks crack on this gun now on the muzzle loader the breach plug froze up in the gun and ruined the barrel. I love the encore but this one gun is giving me nothing but trouble. I cleaned the plug and threads then first time that i used the tape from tc this happens and it was wrapped properly

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: Have troubles with one encore
« Reply #1 on: January 04, 2009, 03:37:01 AM »
Welcome to the forum!

If the stocks that cracked are a Thompson/Center product, they have a lifetime warranty and they'll replace them for you.

As far as muzzleloader breech plugs are concerned, my advice would be:

1.  Go stainless steel in the first place.
2.  Make sure you clean and lubricate it well after shooting.
3.  If the breech plug really gets stuck, thoroughly treat it with something like Prolong, Prolix, Kano Kroil or some other product before you try to remove it.

Offline One Eye

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 139
  • Gender: Male
Re: Have troubles with one encore
« Reply #2 on: January 04, 2009, 06:32:05 AM »
Call T/C.  Good luck  :-\
Dan
"A government big enough to give you everything you want, is strong enough to take everything you have." ~ Thomas Jefferson