« previous next »
Pages: [1]   Go Down

Author Topic: re-chambering a 30-30 to 30 30 Ackley Imp.  (Read 499 times)

0 Members and 1 Guest are viewing this topic.

Offline timkenred

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
re-chambering a 30-30 to 30 30 Ackley Imp.
« on: January 24, 2009, 04:34:19 PM »
  Hi Everyone ; I've got a 22 inch 30-30 Win . Contender barrel and I want to have it re-chambered to 30-30 Ackley Imp. , does anyone have the chamber reamer and the time to  do the job ?


                                                 Thanks

                                                   Dave (timkenred)
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: re-chambering a 30-30 to 30 30 Ackley Imp.
« Reply #1 on: January 24, 2009, 05:31:39 PM »
GBO sponsor SSK will do it, or you can rent the reamer from GBO sponsor 4D and do it yourself, it's easily done by hand. Sponsors are listed at the top of the links list in the green bar above.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Idaho_Elk_Huntr

  • Trade Count: (12)
  • Contributor
  • ***
  • Posts: 313
  • Gender: Male
Re: re-chambering a 30-30 to 30 30 Ackley Imp.
« Reply #2 on: January 24, 2009, 05:41:01 PM »
I was told the barrel would have to be set back to do it.  So it would really be a pain to near impossible to do an Encore
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: re-chambering a 30-30 to 30 30 Ackley Imp.
« Reply #3 on: January 24, 2009, 05:45:09 PM »
Not true on a rimmed chambering, done one myself on an H&R. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »