« previous next »
Pages: [1]   Go Down

Author Topic: 17 Hmr mach 2 to 17 Akley Bee  (Read 844 times)

0 Members and 2 Guests are viewing this topic.

Offline Mr.Clean

  • Trade Count: (27)
  • Contributor
  • ***
  • Posts: 322
  • Gender: Male
17 Hmr mach 2 to 17 Akley Bee
« on: January 18, 2009, 03:55:28 PM »
Can a guy ream out a 17 mach 2 contender bbl to a 17 Ackley Bee.
 Enough bbl and what about firing pin ?
Logged
If ya ain't living life on the edge. "GET OFF !" Your taking up someones space !!

Offline Hank08

  • Trade Count: (35)
  • A Real Regular
  • ****
  • Posts: 887
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #1 on: January 18, 2009, 05:22:36 PM »
Yes, you could do that and just flip the firing pin switch to centerfire, should be no problem.
H08
Logged

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #2 on: January 18, 2009, 07:14:34 PM »
You'd also need to replace or modify the extractor to work with the 17 AB case.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #3 on: January 19, 2009, 12:15:20 AM »
We had this same discussion once before, and someone stated that the rimfire barrels were made of a different steel ??? ??? ???.  I bought a M2 carbine barrel for the same purpose but have never gotten the job done.  GOOD SHOOTIN', Walt   :-\
Logged

Offline Mr.Clean

  • Trade Count: (27)
  • Contributor
  • ***
  • Posts: 322
  • Gender: Male
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #4 on: January 19, 2009, 05:35:47 AM »
Would it be worht the time and money spent to do it.
 If the barrel steel IS different would it hold up to the Bee?
Logged
If ya ain't living life on the edge. "GET OFF !" Your taking up someones space !!

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #5 on: January 19, 2009, 06:17:13 AM »
Quote from: Hopalong7 on January 19, 2009, 12:15:20 AM
We had this same discussion once before, and someone stated that the rimfire barrels were made of a different steel ??? ??? ???.  ...

My answer to that is "cowpucky".   It would take some TALL proof for me to believe that nonsense.   
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #6 on: January 19, 2009, 07:30:27 AM »
I would be surprised as well.  The only difference I would think made sense is if a different twist was needed.  And that wouldn't be for the steel.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #7 on: January 19, 2009, 09:09:38 AM »
Yea, I thought the same thing before,  TC has a history of having one barrel with one twist in any one caliber.  That statement by "whoever" before was not why I hadn't had my barrel done....just my usual procrastination.  Walt  ::)

Actually, I was (or am) going to make mine .17Ackley Hornet instead of Bee.
Logged

Offline VA Jim

  • GBO Supporter
  • Trade Count: (26)
  • Avid Poster
  • *****
  • Posts: 112
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #8 on: January 19, 2009, 10:23:57 AM »
I've got a 22 rimfire which was rechambered to 22 K-Hornet and I've fired 1000 or more thru it.  It's still shooting 1/2 inch groups  :).  I don't think you need to worry about it.
Logged

Offline Mr.Clean

  • Trade Count: (27)
  • Contributor
  • ***
  • Posts: 322
  • Gender: Male
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #9 on: January 20, 2009, 05:57:35 AM »
Where would be a good place to find out what the cost would be to have this done?
Logged
If ya ain't living life on the edge. "GET OFF !" Your taking up someones space !!

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #10 on: January 20, 2009, 06:13:03 AM »
Quote from: Mr.Clean on January 20, 2009, 05:57:35 AM
Where would be a good place to find out what the cost would be to have this done?

Any gunsmith that does rechambering, and ideally has a 218AB reamer set (or at least knows where he can rent a set).   Most cities of reasonable size have at least one, so you might look locally first.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline manofthe45

  • Trade Count: (36)
  • A Real Regular
  • ****
  • Posts: 834
  • Gender: Male
  • Bucks Hang On The Wall. Does Fill The Freezer
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #11 on: January 20, 2009, 04:23:38 PM »
MGM I believe is 75 for rechamber.  SSK will also do it but noidea on price.
Logged
NRA Member

Offline Mr.Clean

  • Trade Count: (27)
  • Contributor
  • ***
  • Posts: 322
  • Gender: Male
Re: 17 Hmr mach 2 to 17 Akley Bee
« Reply #12 on: January 22, 2009, 05:40:10 AM »
Yepper,,MGM just sent me a response and it is $75 plus shipping ($10-$15) one to two week turn around.

Logged
If ya ain't living life on the edge. "GET OFF !" Your taking up someones space !!
Pages: [1]   Go Up
« previous next »