Author Topic: Synthetic replacement stocks for the Stephens 200/Savage 11 short actions?  (Read 3364 times)

0 Members and 1 Guest are viewing this topic.

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081

Dear Guys,

  The Stephens 200 (in .308) looks like a great bargain.  But, what if you want to get rid of the ugly factory synthetic stock, and upgrade it to a better synthetic stock.  Does anybody make a quality drop in for this?

  In looking through my catalogues, I find good replacement stocks for the long action Savages (110, 111), but not any for the short action Savages (or Stephens).  (Maybe this is why so many folks on the boards seem to be painting their Stephens synthetic stocks instead of upgrading them?)

  Thanks for any info.

Mannyrock

Offline tfranklin7

  • GBO Supporter
  • Trade Count: (163)
  • Contributor
  • *****
  • Posts: 408
  • Gender: Male
"A government big enough to give you everything you want, is big enough to take away everything you have." - Thomas Jefferson

Offline LHitchcox

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 211
You will sure know your barrel is floated. Lots of space between a factory sporter barrel and a varmint stock. Boyd's makes a laminate that is pretty easy to final fit and finish. I like the looks of their cinnamon laminate. I don't have one, because I painted my factory stock for a coyote gun.

Leon

Offline FW Conch

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 404
  • Gender: Male
If you give yourself a chance to get over it that "ugly" stock actually works quite well.  Or you can always
paint it & improve the appearance a lot.

The problem with the short action Savage & Stevens is there is 3 generations of action bolt spreads & a lot of the aftermarket stocks out there are made for the models produced before 2006. I'm not completely sure, & I don't have time to look it up now, but I think that B &C stock fits the earlier version. If you do a search
on this forum, you will find where the subject has been thoroughly covered, & I'm sure someone will come in with the exact answer.  Good Luck , & let us know what you decide !   :)   Jim
Jim

Offline the jigger

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 259
I personally like the Bell& Carlson. Their Duramaxx is designed for the Savage Varmint weight barrels. Their Carbelite is for Sporter weight barrels(like the Stevens200). I have both and am satisfied with them. Go to midwayusa.com and look at their offerings in Bell&carlson stocks.
 On the other hand take your barreled action out of the stock, use 440 grit sandpaper and Krylon spray paint in your choice of color and re-finish that "ugly" gray stock. My choice of color was black.
GOOD LUCK and GOOD SHOOTING!!!
IF YOU'RE GONNA GET OLD,YOU BETTER BE TOUGH!! GETTIN' OLD AIN'T FOR SISSIES!!!

Offline pa hog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34

Offline skwirl

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
  • Gender: Male
    • Pa-Outdoors
Just sent the stevens stock out to be dipped in camo

Offline glockman55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 154
  • Gender: Male
I put a Boyd's laminate stock on my Sav. 116 , one thing to remember is, it is heavier than syn.. This one is 11.2 lbs. You will have to fit any stock you buy, some more than others.

Glock 23  http://obamaclock.org/
Sig. Ultra Compact 1911
Sig. P-232
Sig. P-238

Offline Blue Duck

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 553
  • Gender: Male
 Skwirl.........  Whats that dipping going to cost you?    Im thinking about it myself.......

Offline skwirl

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
  • Gender: Male
    • Pa-Outdoors
$85.00 to dip and you pay shipping to and from
http://www.camo-solutions.com/